46 lines
1.8 KiB
Markdown
46 lines
1.8 KiB
Markdown
h87a
|
|
===
|
|
|
|
A QMK-powered replacement PCB for custom TKL keyboards. This PCB has the same size of the b.87 PCB, while using the USB port placement and spacebar stabilizer orientation as the a.87 PCB.
|
|
|
|
Keyboard Maintainer: [hineybush](https://github.com/hineybush)
|
|
Hardware Supported: h87a ver. 1.5, ver. 1.6 (normal and thin), h87alps
|
|
Hardware Availability: hineybush.com
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make hineybush/h87a:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## h87a hardware information
|
|
|
|
Controller: Atmega32u4
|
|
|
|
/* Column pin configuration
|
|
* col: 0 1 2 3 4 5 6 7 8
|
|
* pin: F0 F1 F4 F5 F6 F7 C7 C6 D2
|
|
*/
|
|
|
|
/* Row pin configuration
|
|
* row: 0 1 2 3 4 5 6 7 8 9 10 11
|
|
* pin: B0 B1 B2 B3 D0 D1 B5 B6 D7 B4 D6 D4 (Rev 1)
|
|
*/
|
|
|
|
The H87a PCB utilizes duplex matrix organization.
|
|
|
|
Caps Lock LED: D5
|
|
Scroll Lock LED: E6
|
|
Num Lock LED: not supported
|
|
Backlight Pin: B7
|
|
RGB Data Pin: D3
|
|
|
|
|
|
|
|
For ver 1.5 in-switch indicators:
|
|
To connect the Caps Lock LED to the main backlight matrix, jump the middle pad and the left pad on J1. To use the Caps Lock LED as an indicator, jump the middle pad and the right pad on J1.
|
|
|
|
To connect the Scroll Lock LED to the main backlight matrix, jump the middle pad and the right pad on J2. To use the Scroll Lock LED as an indicator, jump the middle pad and the left pad on J2.
|
|
|
|
Note: The different orientations of J1 and J2 was fixed with ver. 1.6.
|