107 lines
2.8 KiB
C
107 lines
2.8 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.io/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GINPUT && GINPUT_NEED_MOUSE
|
|
|
|
#define GMOUSE_DRIVER_VMT GMOUSEVMT_FT5336
|
|
#include "src/ginput/ginput_driver_mouse.h"
|
|
|
|
// Get the hardware interface
|
|
#include "gmouse_lld_FT5336_board.h"
|
|
|
|
// Hardware definitions
|
|
#include "drivers/ginput/touch/FT5336/ft5336.h"
|
|
|
|
static gBool ft5336Init(GMouse* m, unsigned driverinstance)
|
|
{
|
|
// Initialize the board stuff
|
|
if (!init_board(m, driverinstance)) {
|
|
return gFalse;
|
|
}
|
|
|
|
// We need at least 200 ms worth of delay here...
|
|
gfxSleepMilliseconds(200);
|
|
|
|
// Check Chip ID
|
|
if (read_byte(m, FT5336_CHIP_ID_REG) != FT5336_ID_VALUE) {
|
|
return gFalse;
|
|
}
|
|
|
|
// Disable interrupts. We use this chip in polling mode
|
|
write_reg(m, FT5336_GMODE_REG, (FT5336_G_MODE_INTERRUPT_POLLING & (FT5336_G_MODE_INTERRUPT_MASK >> FT5336_G_MODE_INTERRUPT_SHIFT)) << FT5336_G_MODE_INTERRUPT_SHIFT);
|
|
|
|
/*
|
|
// Init default values. (From NHD-3.5-320240MF-ATXL-CTP-1 datasheet)
|
|
// Valid touching detect threshold
|
|
write_reg(m, FT5336_TH_GROUP_REG, 0x16);
|
|
|
|
// Touch difference threshold
|
|
write_reg(m, FT5336_TH_DIFF_REG, 0xA0);
|
|
|
|
// Delay to enter 'Monitor' status (s)
|
|
write_reg(m, FT5336_TIMEENTERMONITOR_REG, 0x0A);
|
|
|
|
// Period of 'Active' status (ms)
|
|
write_reg(m, FT5336_PERIODACTIVE_REG, 0x06);
|
|
|
|
// Timer to enter 'idle' when in 'Monitor' (ms)
|
|
write_reg(m, FT5336_PERIODMONITOR_REG, 0x28);
|
|
*/
|
|
return gTrue;
|
|
}
|
|
|
|
static gBool ft5336ReadXYZ(GMouse* m, GMouseReading* pdr)
|
|
{
|
|
// Assume not touched.
|
|
pdr->buttons = 0;
|
|
pdr->z = 0;
|
|
|
|
// Only take a reading if exactly one touch contact point
|
|
if (read_byte(m, FT5336_TD_STAT_REG) == 1) {
|
|
// Get and return X, Y an Z values
|
|
pdr->y = (gCoord)(read_word(m, FT5336_P1_XH_REG) & 0x0FFF);
|
|
pdr->x = (gCoord)(read_word(m, FT5336_P1_YH_REG) & 0x0FFF);
|
|
pdr->z = 1;
|
|
}
|
|
|
|
return gTrue;
|
|
}
|
|
|
|
const GMouseVMT const GMOUSE_DRIVER_VMT[1] = {{
|
|
{
|
|
GDRIVER_TYPE_TOUCH,
|
|
GMOUSE_VFLG_TOUCH | GMOUSE_VFLG_ONLY_DOWN | GMOUSE_VFLG_POORUPDOWN,
|
|
sizeof(GMouse) + GMOUSE_FT5336_BOARD_DATA_SIZE,
|
|
_gmouseInitDriver,
|
|
_gmousePostInitDriver,
|
|
_gmouseDeInitDriver
|
|
},
|
|
1, // z_max - (currently?) not supported
|
|
0, // z_min - (currently?) not supported
|
|
1, // z_touchon
|
|
0, // z_touchoff
|
|
{ // pen_jitter
|
|
GMOUSE_FT5336_PEN_CALIBRATE_ERROR, // calibrate
|
|
GMOUSE_FT5336_PEN_CLICK_ERROR, // click
|
|
GMOUSE_FT5336_PEN_MOVE_ERROR // move
|
|
},
|
|
{ // finger_jitter
|
|
GMOUSE_FT5336_FINGER_CALIBRATE_ERROR, // calibrate
|
|
GMOUSE_FT5336_FINGER_CLICK_ERROR, // click
|
|
GMOUSE_FT5336_FINGER_MOVE_ERROR // move
|
|
},
|
|
ft5336Init, // init
|
|
0, // deinit
|
|
ft5336ReadXYZ, // get
|
|
0, // calsave
|
|
0 // calload
|
|
}};
|
|
|
|
#endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */
|