QMK/lib/ugfx/drivers/ginput/dial/GADC
2020-03-23 10:48:11 +01:00
..
driver.mk initial upload 2020-03-23 10:48:11 +01:00
ginput_lld_dial_board_template.h initial upload 2020-03-23 10:48:11 +01:00
ginput_lld_dial_config.h initial upload 2020-03-23 10:48:11 +01:00
ginput_lld_dial_GADC.c initial upload 2020-03-23 10:48:11 +01:00
readme.txt initial upload 2020-03-23 10:48:11 +01:00

To use this driver:

1. Add in your gfxconf.h:
	a)  #define GFX_USE_GINPUT		GFXON
		#define GINPUT_NEED_DIAL	GFXON
		#define GINPUT_NEED_GADC	GFXON
	d) If you are not using a known board then create a ginput_lld_toggle_board.h file
		and ensure it is on your include path.
		Use the ginput_lld_dial_board_example.h file as a basis.
		Currently known boards are:
			Olimex SAM7-EX256

2. To your makefile add the following lines:
	include $(GFXLIB)/drivers/ginput/dial/GADC/ginput_lld.mk
	include $(GFXLIB)/drivers/gadc/yourGADCdriver/gadc_lld.mk