447 lines
17 KiB
C
447 lines
17 KiB
C
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2019.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.lufa-lib.org
|
|
*/
|
|
|
|
/*
|
|
Copyright 2019 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
|
|
Permission to use, copy, modify, distribute, and sell this
|
|
software and its documentation for any purpose is hereby granted
|
|
without fee, provided that the above copyright notice appear in
|
|
all copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaims all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
/** \file
|
|
* \brief ADC Peripheral Driver (AVR8)
|
|
*
|
|
* On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
|
|
* peripheral internally.
|
|
*
|
|
* \note This file should not be included directly. It is automatically included as needed by the ADC driver
|
|
* dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
|
|
*/
|
|
|
|
/** \ingroup Group_ADC
|
|
* \defgroup Group_ADC_AVR8 ADC Peripheral Driver (AVR8)
|
|
*
|
|
* \section Sec_ADC_AVR8_ModDescription Module Description
|
|
* On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
|
|
* peripheral internally.
|
|
*
|
|
* \note This file should not be included directly. It is automatically included as needed by the ADC driver
|
|
* dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
|
|
*
|
|
* \section Sec_ADC_AVR8_ExampleUsage Example Usage
|
|
* The following snippet is an example of how this module may be used within a typical
|
|
* application.
|
|
*
|
|
* \code
|
|
* // Initialize the ADC driver before first use
|
|
* ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
|
|
*
|
|
* // Must setup the ADC channel to read beforehand
|
|
* ADC_SetupChannel(1);
|
|
*
|
|
* // Perform a single conversion of the ADC channel 1
|
|
* ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
|
|
* printf("Conversion Result: %d\r\n", ADC_GetResult());
|
|
*
|
|
* // Start reading ADC channel 1 in free running (continuous conversion) mode
|
|
* ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
|
|
* for (;;)
|
|
* {
|
|
* while (!(ADC_IsReadingComplete())) {};
|
|
* printf("Conversion Result: %d\r\n", ADC_GetResult());
|
|
* }
|
|
* \endcode
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
#ifndef __ADC_AVR8_H__
|
|
#define __ADC_AVR8_H__
|
|
|
|
/* Includes: */
|
|
#include "../../../Common/Common.h"
|
|
|
|
/* Enable C linkage for C++ Compilers: */
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Preprocessor Checks: */
|
|
#if !defined(__INCLUDE_FROM_ADC_H)
|
|
#error Do not include this file directly. Include LUFA/Drivers/Peripheral/ADC.h instead.
|
|
#endif
|
|
|
|
#if !(defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
|
|
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
|
|
defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
|
|
#error The ADC peripheral driver is not currently available for your selected microcontroller model.
|
|
#endif
|
|
|
|
/* Public Interface - May be used in end-application: */
|
|
/* Macros: */
|
|
/** \name ADC Reference Configuration Masks */
|
|
//@{
|
|
/** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
|
|
#define ADC_REFERENCE_AREF 0
|
|
|
|
/** Reference mask, for using the voltage present at the AVR's AVCC pin for the ADC reference. */
|
|
#define ADC_REFERENCE_AVCC (1 << REFS0)
|
|
|
|
/** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
|
|
#define ADC_REFERENCE_INT2560MV ((1 << REFS1) | (1 << REFS0))
|
|
//@}
|
|
|
|
/** \name ADC Result Adjustment Configuration Masks */
|
|
//@{
|
|
/** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
|
|
* \ref ADC_GetResult() macro contain the 8 most significant bits of the result.
|
|
*/
|
|
#define ADC_LEFT_ADJUSTED (1 << ADLAR)
|
|
|
|
/** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
|
|
* \ref ADC_GetResult() macro contain the 8 least significant bits of the result.
|
|
*/
|
|
#define ADC_RIGHT_ADJUSTED (0 << ADLAR)
|
|
//@}
|
|
|
|
/** \name ADC Mode Configuration Masks */
|
|
//@{
|
|
/** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
|
|
* is capable of at the given input clock speed.
|
|
*/
|
|
#define ADC_FREE_RUNNING (1 << ADATE)
|
|
|
|
/** Sets the ADC mode to single conversion, so that only a single conversion will take place before
|
|
* the ADC returns to idle.
|
|
*/
|
|
#define ADC_SINGLE_CONVERSION (0 << ADATE)
|
|
//@}
|
|
|
|
/** \name ADC Prescaler Configuration Masks */
|
|
//@{
|
|
/** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
|
|
#define ADC_PRESCALE_2 (1 << ADPS0)
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 4 the AVR's system clock. */
|
|
#define ADC_PRESCALE_4 (1 << ADPS1)
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 8 the AVR's system clock. */
|
|
#define ADC_PRESCALE_8 ((1 << ADPS0) | (1 << ADPS1))
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 16 the AVR's system clock. */
|
|
#define ADC_PRESCALE_16 (1 << ADPS2)
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 32 the AVR's system clock. */
|
|
#define ADC_PRESCALE_32 ((1 << ADPS2) | (1 << ADPS0))
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 64 the AVR's system clock. */
|
|
#define ADC_PRESCALE_64 ((1 << ADPS2) | (1 << ADPS1))
|
|
|
|
/** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
|
|
#define ADC_PRESCALE_128 ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))
|
|
//@}
|
|
|
|
/** \name ADC MUX Masks */
|
|
//@{
|
|
/** MUX mask define for the ADC0 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_CHANNEL0 (0x00 << MUX0)
|
|
|
|
/** MUX mask define for the ADC1 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_CHANNEL1 (0x01 << MUX0)
|
|
|
|
#if (!(defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) || defined(__DOXYGEN__))
|
|
/** MUX mask define for the ADC2 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL2 (0x02 << MUX0)
|
|
|
|
/** MUX mask define for the ADC3 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL3 (0x03 << MUX0)
|
|
#endif
|
|
|
|
/** MUX mask define for the ADC4 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_CHANNEL4 (0x04 << MUX0)
|
|
|
|
/** MUX mask define for the ADC5 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_CHANNEL5 (0x05 << MUX0)
|
|
|
|
/** MUX mask define for the ADC6 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_CHANNEL6 (0x06 << MUX0)
|
|
|
|
/** MUX mask define for the ADC7 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
|
|
#define ADC_CHANNEL7 (0x07 << MUX0)
|
|
|
|
#if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
|
|
/** MUX mask define for the ADC8 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL8 ((1 << 8) | (0x00 << MUX0))
|
|
|
|
/** MUX mask define for the ADC9 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL9 ((1 << 8) | (0x01 << MUX0))
|
|
|
|
/** MUX mask define for the ADC10 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL10 ((1 << 8) | (0x02 << MUX0))
|
|
|
|
/** MUX mask define for the ADC11 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL11 ((1 << 8) | (0x03 << MUX0))
|
|
|
|
/** MUX mask define for the ADC12 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL12 ((1 << 8) | (0x04 << MUX0))
|
|
|
|
/** MUX mask define for the ADC13 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_CHANNEL13 ((1 << 8) | (0x05 << MUX0))
|
|
|
|
/** MUX mask define for the internal temperature sensor channel of the ADC. See \ref ADC_StartReading() and
|
|
* \ref ADC_GetChannelReading().
|
|
*
|
|
* \note Not available on all AVR models.
|
|
*/
|
|
#define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0))
|
|
#endif
|
|
|
|
/** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
|
|
#define ADC_1100MV_BANDGAP (0x1E << MUX0)
|
|
|
|
/** Retrieves the ADC MUX mask for the given ADC channel number.
|
|
*
|
|
* \attention This macro will only work correctly on channel numbers that are compile-time
|
|
* constants defined by the preprocessor.
|
|
*
|
|
* \param[in] Channel Index of the ADC channel whose MUX mask is to be retrieved.
|
|
*/
|
|
#define ADC_GET_CHANNEL_MASK(Channel) CONCAT_EXPANDED(ADC_CHANNEL, Channel)
|
|
//@}
|
|
|
|
/* Inline Functions: */
|
|
/** Configures the given ADC channel, ready for ADC conversions. This function sets the
|
|
* associated port pin as an input and disables the digital portion of the I/O to reduce
|
|
* power consumption.
|
|
*
|
|
* \note This must only be called for ADC channels with are connected to a physical port
|
|
* pin of the AVR, denoted by its special alternative function ADCx.
|
|
*
|
|
* \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
|
|
*
|
|
* \param[in] ChannelIndex ADC channel number to set up for conversions.
|
|
*/
|
|
static inline void ADC_SetupChannel(const uint8_t ChannelIndex)
|
|
{
|
|
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
|
|
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))
|
|
DDRF &= ~(1 << ChannelIndex);
|
|
DIDR0 |= (1 << ChannelIndex);
|
|
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
|
|
if (ChannelIndex < 8)
|
|
{
|
|
DDRF &= ~(1 << ChannelIndex);
|
|
DIDR0 |= (1 << ChannelIndex);
|
|
}
|
|
else if (ChannelIndex == 8)
|
|
{
|
|
DDRD &= ~(1 << 4);
|
|
DIDR2 |= (1 << 0);
|
|
}
|
|
else if (ChannelIndex < 11)
|
|
{
|
|
DDRD &= ~(1 << (ChannelIndex - 3));
|
|
DIDR2 |= (1 << (ChannelIndex - 8));
|
|
}
|
|
else
|
|
{
|
|
DDRB &= ~(1 << (ChannelIndex - 7));
|
|
DIDR2 |= (1 << (ChannelIndex - 8));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/** De-configures the given ADC channel, re-enabling digital I/O mode instead of analog. This
|
|
* function sets the associated port pin as an input and re-enabled the digital portion of
|
|
* the I/O.
|
|
*
|
|
* \note This must only be called for ADC channels with are connected to a physical port
|
|
* pin of the AVR, denoted by its special alternative function ADCx.
|
|
*
|
|
* \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
|
|
*
|
|
* \param[in] ChannelIndex ADC channel number to set up for conversions.
|
|
*/
|
|
static inline void ADC_DisableChannel(const uint8_t ChannelIndex)
|
|
{
|
|
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
|
|
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))
|
|
DDRF &= ~(1 << ChannelIndex);
|
|
DIDR0 &= ~(1 << ChannelIndex);
|
|
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
|
|
if (ChannelIndex < 8)
|
|
{
|
|
DDRF &= ~(1 << ChannelIndex);
|
|
DIDR0 &= ~(1 << ChannelIndex);
|
|
}
|
|
else if (ChannelIndex == 8)
|
|
{
|
|
DDRD &= ~(1 << 4);
|
|
DIDR2 &= ~(1 << 0);
|
|
}
|
|
else if (ChannelIndex < 11)
|
|
{
|
|
DDRD &= ~(1 << (ChannelIndex - 3));
|
|
DIDR2 &= ~(1 << (ChannelIndex - 8));
|
|
}
|
|
else
|
|
{
|
|
DDRB &= ~(1 << (ChannelIndex - 7));
|
|
DIDR2 &= ~(1 << (ChannelIndex - 8));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/** Starts the reading of the given channel, but does not wait until the conversion has completed.
|
|
* Once executed, the conversion status can be determined via the \ref ADC_IsReadingComplete() macro and
|
|
* the result read via the \ref ADC_GetResult() macro.
|
|
*
|
|
* If the ADC has been initialized in free running mode, calling this function once will begin the repeated
|
|
* conversions. If the ADC is in single conversion mode (or the channel to convert from is to be changed),
|
|
* this function must be called each time a conversion is to take place.
|
|
*
|
|
* \param[in] MUXMask ADC channel mask, reference mask and adjustment mask.
|
|
*/
|
|
static inline void ADC_StartReading(const uint16_t MUXMask)
|
|
{
|
|
ADMUX = MUXMask;
|
|
|
|
#if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
|
|
if (MUXMask & (1 << 8))
|
|
ADCSRB |= (1 << MUX5);
|
|
else
|
|
ADCSRB &= ~(1 << MUX5);
|
|
#endif
|
|
|
|
ADCSRA |= (1 << ADSC);
|
|
}
|
|
|
|
/** Indicates if the current ADC conversion is completed, or still in progress.
|
|
*
|
|
* \return Boolean \c false if the reading is still taking place, or true if the conversion is
|
|
* complete and ready to be read out with \ref ADC_GetResult().
|
|
*/
|
|
static inline bool ADC_IsReadingComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
|
|
static inline bool ADC_IsReadingComplete(void)
|
|
{
|
|
return ((ADCSRA & (1 << ADIF)) ? true : false);
|
|
}
|
|
|
|
/** Retrieves the conversion value of the last completed ADC conversion and clears the reading
|
|
* completion flag.
|
|
*
|
|
* \return The result of the last ADC conversion as an unsigned value.
|
|
*/
|
|
static inline uint16_t ADC_GetResult(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
|
|
static inline uint16_t ADC_GetResult(void)
|
|
{
|
|
ADCSRA |= (1 << ADIF);
|
|
return ADC;
|
|
}
|
|
|
|
/** Performs a complete single reading from channel, including a polling spin-loop to wait for the
|
|
* conversion to complete, and the returning of the converted value.
|
|
*
|
|
* \note For free running mode, the automated conversions should be initialized with a single call
|
|
* to \ref ADC_StartReading() to select the channel and begin the automated conversions, and
|
|
* the results read directly from the \ref ADC_GetResult() instead to reduce overhead.
|
|
*
|
|
* \param[in] MUXMask Mask comprising of an ADC channel mask, reference mask and adjustment mask.
|
|
*
|
|
* \return Converted ADC result for the given ADC channel.
|
|
*/
|
|
static inline uint16_t ADC_GetChannelReading(const uint16_t MUXMask) ATTR_WARN_UNUSED_RESULT;
|
|
static inline uint16_t ADC_GetChannelReading(const uint16_t MUXMask)
|
|
{
|
|
ADC_StartReading(MUXMask);
|
|
|
|
while (!(ADC_IsReadingComplete()));
|
|
|
|
return ADC_GetResult();
|
|
}
|
|
|
|
/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
|
|
* The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
|
|
* prescaler masks.
|
|
*
|
|
* \param[in] Mode Mask of ADC prescale and mode settings.
|
|
*/
|
|
static inline void ADC_Init(const uint8_t Mode) ATTR_ALWAYS_INLINE;
|
|
static inline void ADC_Init(const uint8_t Mode)
|
|
{
|
|
ADCSRA = ((1 << ADEN) | Mode);
|
|
}
|
|
|
|
/** Turns off the ADC. If this is called, any further ADC operations will require a call to
|
|
* \ref ADC_Init() before the ADC can be used again.
|
|
*/
|
|
static inline void ADC_Disable(void) ATTR_ALWAYS_INLINE;
|
|
static inline void ADC_Disable(void)
|
|
{
|
|
ADCSRA = 0;
|
|
}
|
|
|
|
/** Indicates if the ADC is currently enabled.
|
|
*
|
|
* \return Boolean \c true if the ADC subsystem is currently enabled, \c false otherwise.
|
|
*/
|
|
static inline bool ADC_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
|
|
static inline bool ADC_GetStatus(void)
|
|
{
|
|
return ((ADCSRA & (1 << ADEN)) ? true : false);
|
|
}
|
|
|
|
/* Disable C linkage for C++ Compilers: */
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|