121 lines
3.0 KiB
C
121 lines
3.0 KiB
C
/*
|
|
ChibiOS - Copyright (C) 2016..2018 Theodore Ateba
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "chprintf.h"
|
|
|
|
BaseSequentialStream *chp = (BaseSequentialStream *) &SD1;
|
|
uint16_t cpt = 0; /* Counter for serial print. */
|
|
|
|
/*
|
|
* @brief Data to transmit over the spi bus.
|
|
*/
|
|
char txbuf[] = "ABCD";
|
|
|
|
/**
|
|
* @brief Spi callback.
|
|
*/
|
|
void spiCallback(SPIDriver *spip) {
|
|
|
|
chnWrite(&SD1, (const uint8_t *)"*", 1);
|
|
spip->txbuf = 0;
|
|
};
|
|
|
|
/**
|
|
* @biref SPI configuration strucrture.
|
|
*/
|
|
static const SPIConfig spiCfg = {
|
|
spiCallback, /* SPI callback. */
|
|
IOPORT2, /* SPI chip select port. */
|
|
7, /* SPI chip select pad. */
|
|
SPI_PRESCALER_DIV4_gc, /* prescaler. */
|
|
SPI_MODE_0_gc, /* SPI clock mode. */
|
|
true, /* SPI role "master/slave". */
|
|
false, /* SPI data order. */
|
|
false, /* SPI double speed bit. */
|
|
SPI_INTLVL_OFF_gc, /* SPI interrupt level. */
|
|
};
|
|
|
|
/**
|
|
* @brief Blink thread.
|
|
*/
|
|
static THD_WORKING_AREA(waThread1, 32);
|
|
static THD_FUNCTION(Thread1, arg) {
|
|
|
|
(void)arg;
|
|
chRegSetThreadName("Blinker");
|
|
|
|
while (true) {
|
|
palClearPad(IOPORT5, PORTE_LED);
|
|
chThdSleepMilliseconds(1000);
|
|
palSetPad(IOPORT5, PORTE_LED);
|
|
chThdSleepMilliseconds(100);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Application entry point.
|
|
*/
|
|
int main(void) {
|
|
|
|
/*
|
|
* System initializations.
|
|
* - HAL initialization, this also initializes the configured device drivers
|
|
* and performs the board-specific initializations.
|
|
* - Kernel initialization, the main() function becomes a thread and the
|
|
* RTOS is active.
|
|
*/
|
|
halInit();
|
|
chSysInit();
|
|
|
|
|
|
palClearPad(IOPORT5, PORTE_LED);
|
|
|
|
/*
|
|
* Configure TX (PINC3) and RX (PIN2) for the USART1.
|
|
*/
|
|
palSetPadMode(IOPORT3, PIN3, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPadMode(IOPORT3, PIN2, PAL_MODE_INPUT_PULLUP);
|
|
|
|
/*
|
|
* Start the Serial driver 1 by using the default configuration.
|
|
*/
|
|
sdStart(&SD1, NULL);
|
|
|
|
/*
|
|
* Activate the spi driver 1 by using the defined configuration.
|
|
*/
|
|
spiStart(&SPID1, &spiCfg);
|
|
|
|
/*
|
|
* Starts the LED blinker thread.
|
|
*/
|
|
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
|
|
|
|
chprintf(chp, "AVR SPI program testhal program example.\r\n");
|
|
|
|
while (TRUE) {
|
|
chprintf(chp, "Hello world %i.\r\n", cpt++);
|
|
spiSelect(&SPID1);
|
|
spiStartSend(&SPID1, 4, txbuf);
|
|
spiUnselect(&SPID1);
|
|
chThdSleepMilliseconds(1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|