***************************************************************************** ** ChibiOS/RT port for ARM-Cortex-M0 OSHChip (nRF51822). ** ***************************************************************************** ** TARGET ** The demo runs on an OSHChip_V1.0 board. This board is powered by a Nordic Semiconductor nRF51822 processor which is an ARM Cortex-M0 with bluetooth radio hardware. For information about the board, see http://oshchip.org/ ** The Demo ** This demo will print the standard TestThread output over UART (TX is DIP Pin 1) and sequentially blink all three LEDs. ** Build Procedure ** The demo has been tested using the freely available GCC ARM Embedded toolchain. ** Notes ** If the Mass Storage mechanism of the official OSHChip CMSIS-DAP debugger is desired for flashing the firmware, the hex file may need patching to be accepted by the Mass Storage flasher; see `patch_hex.sh`.