QMK/keyboards/diverge3
2020-03-23 10:48:11 +01:00
..
keymaps initial upload 2020-03-23 10:48:11 +01:00
config.h initial upload 2020-03-23 10:48:11 +01:00
diverge3.c initial upload 2020-03-23 10:48:11 +01:00
diverge3.h initial upload 2020-03-23 10:48:11 +01:00
info.json initial upload 2020-03-23 10:48:11 +01:00
readme.md initial upload 2020-03-23 10:48:11 +01:00
rules.mk initial upload 2020-03-23 10:48:11 +01:00

diverge3

A split 5x7 keyboard with 3 thumb keys. Made by Unikeyboard.

Keyboard Maintainer: IslandMan93
Hardware Supported: Pro Micro
Hardware Availability: Diverge 3

Make example for this keyboard (after setting up your build environment):

make diverge3:default

Or for the Workman layout:

make diverge3:workman

See build environment setup then the make instructions for more information.

Reflashing Animus

Reflashing the stock firmware is pretty easy. Just follow the same steps in the original guide. You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites.