278 lines
7.8 KiB
C
278 lines
7.8 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2015 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Board file for HY-MiniSTM32V board from HAOYU (China).
|
|
* www.powermcu.com or www.hotmcu.com.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_HY_MINI_STM32V
|
|
#define BOARD_NAME "HY-MiniSTM32V"
|
|
|
|
/*
|
|
* Board frequencies.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 8000000
|
|
|
|
/*
|
|
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
|
*/
|
|
#define STM32F10X_HD
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
|
|
#define GPIOA_PIN0 0
|
|
#define GPIOA_PIN1 1
|
|
#define GPIOA_PIN2 2
|
|
#define GPIOA_PIN3 3
|
|
#define GPIOA_TP_CS 4
|
|
#define GPIOA_SPI_SCK 5
|
|
#define GPIOA_SPI_MISO 6
|
|
#define GPIOA_SPI_MOSI 7
|
|
#define GPIOA_PIN8 8
|
|
#define GPIOA_USART1_TX 9
|
|
#define GPIOA_USART1_RX 10
|
|
#define GPIOA_USB_DM 11
|
|
#define GPIOA_USB_DP 12
|
|
#define GPIOA_PIN13 13
|
|
#define GPIOA_PIN14 14
|
|
#define GPIOA_PIN15 15
|
|
|
|
#define GPIOB_LED1 0
|
|
#define GPIOB_LED2 1
|
|
#define GPIOB_USER_KEYB 2
|
|
#define GPIOB_PIN3 3
|
|
#define GPIOB_PIN4 4
|
|
#define GPIOB_BL_CNT 5
|
|
#define GPIOB_TP_IRQ 6
|
|
#define GPIOB_USB_EN 7
|
|
#define GPIOB_PIN8 8
|
|
#define GPIOB_PIN9 9
|
|
#define GPIOB_PIN10 10
|
|
#define GPIOB_PIN11 11
|
|
#define GPIOB_PIN12 12
|
|
#define GPIOB_PIN13 13
|
|
#define GPIOB_PIN14 14
|
|
#define GPIOB_PIN15 15
|
|
|
|
#define GPIOC_PIN0 0
|
|
#define GPIOC_PIN1 1
|
|
#define GPIOC_PIN2 2
|
|
#define GPIOC_PIN3 3
|
|
#define GPIOC_PIN4 4
|
|
#define GPIOC_PIN5 5
|
|
#define GPIOC_PIN6 6
|
|
#define GPIOC_PIN7 7
|
|
#define GPIOC_SDIO_D0 8
|
|
#define GPIOC_SDIO_D1 9
|
|
#define GPIOC_SDIO_D2 10
|
|
#define GPIOC_SDIO_D3 11
|
|
#define GPIOC_SDIO_CK 12
|
|
#define GPIOC_USER_KEYA 13
|
|
#define GPIOC_PIN14 14
|
|
#define GPIOC_PIN15 15
|
|
|
|
#define GPIOD_FSMC_D2 0
|
|
#define GPIOD_FSMC_D3 1
|
|
#define GPIOD_SDIO_CMD 2
|
|
#define GPIOD_SD_CD 3
|
|
#define GPIOD_LCD_RD 4
|
|
#define GPIOD_LCD_WR 5
|
|
#define GPIOD_PIN6 6
|
|
#define GPIOD_LCD_CS 7
|
|
#define GPIOD_FSMC_D13 8
|
|
#define GPIOD_FSMC_D14 9
|
|
#define GPIOD_FSMC_D15 10
|
|
#define GPIOD_LCD_RS 11
|
|
#define GPIOD_PIN12 12
|
|
#define GPIOD_PIN13 13
|
|
#define GPIOD_FSMC_D0 14
|
|
#define GPIOD_FSMC_D1 15
|
|
|
|
#define GPIOE_PIN0 0
|
|
#define GPIOE_PIN1 1
|
|
#define GPIOE_PIN2 2
|
|
#define GPIOE_PIN3 3
|
|
#define GPIOE_PIN4 4
|
|
#define GPIOE_PIN5 5
|
|
#define GPIOE_PIN6 6
|
|
#define GPIOE_FSMC_D4 7
|
|
#define GPIOE_FSMC_D5 8
|
|
#define GPIOE_FSMC_D6 9
|
|
#define GPIOE_FSMC_D7 10
|
|
#define GPIOE_FSMC_D8 11
|
|
#define GPIOE_FSMC_D9 12
|
|
#define GPIOE_FSMC_D10 13
|
|
#define GPIOE_FSMC_D11 14
|
|
#define GPIOE_FSMC_D12 15
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
*
|
|
* The digits have the following meaning:
|
|
* 0 - Analog input.
|
|
* 1 - Push Pull output 10MHz.
|
|
* 2 - Push Pull output 2MHz.
|
|
* 3 - Push Pull output 50MHz.
|
|
* 4 - Digital input.
|
|
* 5 - Open Drain output 10MHz.
|
|
* 6 - Open Drain output 2MHz.
|
|
* 7 - Open Drain output 50MHz.
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
|
* 9 - Alternate Push Pull output 10MHz.
|
|
* A - Alternate Push Pull output 2MHz.
|
|
* B - Alternate Push Pull output 50MHz.
|
|
* C - Reserved.
|
|
* D - Alternate Open Drain output 10MHz.
|
|
* E - Alternate Open Drain output 2MHz.
|
|
* F - Alternate Open Drain output 50MHz.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
|
|
/*
|
|
* Port A setup.
|
|
* Everything input with pull-up except:
|
|
* PA4 - Push Pull output 50MHz (TP_CS)
|
|
* PA5 - Alternate Push Pull output 50MHz (SPI_SCK)
|
|
* PA6 - Digital input (SPI_MISO)
|
|
* PA7 - Alternate Push Pull output 50MHz (SPI_MOSI)
|
|
* PA9 - Alternate Push Pull output 50MHz (USART1_TX)
|
|
* PA10 - Digital input (USART1_RX)
|
|
* PA11 - Digital input (USB_DM)
|
|
*/
|
|
#define VAL_GPIOACRL 0xB4B38888 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x888844B8 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port B setup.
|
|
* Everything input with pull-up except:
|
|
* PB0 - Push Pull output 50MHz (LED1)
|
|
* PB1 - Push Pull output 50MHz (LED2)
|
|
* PB2 - Digital input (USER_KEYB)
|
|
* PB5 - Alternate Push Pull output 50MHz (BL_CNT)
|
|
* PB6 - Digital input (TP_IRQ)
|
|
* PB7 - Push Pull output 50MHz (init low) (USB_EN)
|
|
*/
|
|
|
|
#define VAL_GPIOBCRL 0x34B88433 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFF7FFC
|
|
|
|
/*
|
|
* Port C setup.
|
|
* Everything input with pull-up except:
|
|
* PC8 - Digital input (SDIO_D0)
|
|
* PC9 - Digital input (SDIO_D1)
|
|
* PC10 - Digital input (SDIO_D2)
|
|
* PC11 - Digital input (SDIO_D3)
|
|
* PC12 - Digital input (SDIO_CK)
|
|
* PC13 - Digital input (GPIOC_USER_KEYA)
|
|
*/
|
|
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
|
|
#define VAL_GPIOCCRH 0x88444444 /* PC15...PC8 */
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port D setup.
|
|
* Everything input with pull-up except:
|
|
* PD0 - Alternate Push Pull output 50MHz (FSMC_D2)
|
|
* PD1 - Alternate Push Pull output 50MHz (FSMC_D1)
|
|
* PD2 - Digital input (SDIO_CMD)
|
|
* PD3 - Digital input (SD_CD)
|
|
* PD4 - Alternate Push Pull output 50MHz (LCD_RD)
|
|
* PD5 - Alternate Push Pull output 50MHz (LCD_WR)
|
|
* PD7 - Alternate Push Pull output 50MHz (LCD_CS)
|
|
* PD8 - Alternate Push Pull output 50MHz (FSMC_D13)
|
|
* PD9 - Alternate Push Pull output 50MHz (FSMC_D14)
|
|
* PD10 - Alternate Push Pull output 50MHz (FSMC_D15)
|
|
* PD11 - Alternate Push Pull output 50MHz (LCD_RS)
|
|
* PD14 - Alternate Push Pull output 50MHz (FSMC_D0)
|
|
* PD15 - Alternate Push Pull output 50MHz (FSMC_D1)
|
|
*/
|
|
|
|
#define VAL_GPIODCRL 0xB8BB44BB /* PD7...PD0 */
|
|
#define VAL_GPIODCRH 0xBB88BBBB /* PD15...PD8 */
|
|
#define VAL_GPIODODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port E setup.
|
|
* Everything input with pull-up except:
|
|
* PE7 - Alternate Push Pull output 50MHz (FSMC_D4)
|
|
* PE8 - Alternate Push Pull output 50MHz (FSMC_D5)
|
|
* PE9 - Alternate Push Pull output 50MHz (FSMC_D6)
|
|
* PE10 - Alternate Push Pull output 50MHz (FSMC_D7)
|
|
* PE11 - Alternate Push Pull output 50MHz (FSMC_D8)
|
|
* PE12 - Alternate Push Pull output 50MHz (FSMC_D9)
|
|
* PE13 - Alternate Push Pull output 50MHz (FSMC_D10)
|
|
* PE14 - Alternate Push Pull output 50MHz (FSMC_D11)
|
|
* PE15 - Alternate Push Pull output 50MHz (FSMC_D12)
|
|
*/
|
|
|
|
#define VAL_GPIOECRL 0xB8888888 /* PE7...PE0 */
|
|
#define VAL_GPIOECRH 0xBBBBBBBB /* PE15...PE8 */
|
|
#define VAL_GPIOEODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port F setup.
|
|
* Everything input with pull-up
|
|
*/
|
|
|
|
#define VAL_GPIOFCRL 0x88888888 /* PF7...PE0 */
|
|
#define VAL_GPIOFCRH 0x88888888 /* PF15...PE8 */
|
|
#define VAL_GPIOFODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port G setup.
|
|
* Everything input with pull-up
|
|
*/
|
|
|
|
#define VAL_GPIOGCRL 0x88888888 /* PG7...PE0 */
|
|
#define VAL_GPIOGCRH 0x88888888 /* PG15...PE8 */
|
|
#define VAL_GPIOGODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* USB bus activation macro, required by the USB driver.
|
|
*/
|
|
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_EN)
|
|
|
|
/*
|
|
* USB bus de-activation macro, required by the USB driver.
|
|
*/
|
|
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_EN)
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|