*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M0 OSHChip (nRF51822). **
*****************************************************************************
** TARGET **
The demo runs on an OSHChip_V1.0 board. This board is powered by a Nordic
Semiconductor nRF51822 processor which is an ARM Cortex-M0 with bluetooth radio
hardware. For information about the board, see http://oshchip.org/
** The Demo **
This demo will print the standard TestThread output over UART (TX is DIP Pin 1) and sequentially blink all three LEDs.
** Build Procedure **
The demo has been tested using the freely available GCC ARM Embedded toolchain.
** Notes **
If the Mass Storage mechanism of the official OSHChip CMSIS-DAP debugger is desired for flashing the firmware, the hex file may need patching to be accepted by the Mass Storage flasher; see `patch_hex.sh`.
