QMK/keyboards/keebio/nyquist/keymaps/DivergeJM
2020-03-23 10:48:11 +01:00
..
config.h initial upload 2020-03-23 10:48:11 +01:00
keymap.c initial upload 2020-03-23 10:48:11 +01:00
README.md initial upload 2020-03-23 10:48:11 +01:00
rules.mk initial upload 2020-03-23 10:48:11 +01:00

Copyright 2017 James Morgan ja.morgan1@outlook.com

#MogranJM's Nyquist layout

make nyquist/rev1:DivergeJM

This keymap is based on my Terminus_Mini (../../../terminus_mini/default) layout (credit for the names of these layouts goes to UniKeyboard & reddit's /u/blahlicus)

The terminus_mini is a handwired 4x12 ortholinear keyboard with two 2U thumb bar keys. This implementation of the layout converts it to a split 5x12 (two halves, each 5x6) keyboard with a 2U thumb key on the inner bottom corner of each half.

The TERMINUS_MINI layout (../../../terminus_mini/terminus_mini.h) is handwired and the 2U keys are handled using KC_NO to detail that two columns do not have a 4th column. This layout is based on a PCB, so the keymap represents the 2U keys as duplicates of the same 1U key.

.----------------------------------------.     .-----------------------------------------. 
| Esc |   1  |   2  |   3  |   4  |   5  |     |   6  |   7  |   8  |   9  |   0  | Del  | 
|-----+------+------+------+------+------|     |------+------+------+------+------+------| 
| Tab |   Q  |   W  |   F  |   P  |   G  |     |   J  |   L  |   U  |   Y  |   ;  |  \\  | 
|-----+------+------+------+------+------|     |------+------+------+------+------+------| 
| BS  |   A  |   R  |   S  |   T  |   D  |     |   H  |   N  |   E  |   I  |   O  |  '   | 
|-----+------+------+------+------+------|     |------+------+------+------+------+------| 
| LSPO|   Z  |   X  |   C  |   V  |   B  |     |   K  |   M  |   ,  |  \.  |   /  | RSPC | 
|-----+------+------+------+------+------|     |------+------+------+------+------+------| 
| Ctrl| LGUI | LAlt | Lower| Space/Lower |     | Enter/Raise |  Fn  | Mouse| Menu | Ctrl | 
'----------------------------------------'     '-----------------------------------------' 

Base Layer - Colemak

The base layout is Colemak by default. Since the CapsLock key is replaced with BackSpace, this layout has the delete key in the traditional backspace location.

  • QWERTY and Dvorak layers are accessible via the Adjust layer using the standard case switch macro as defined in the default Planck keymap.
  • I've implemented COLEMAK = SAFE_RANGE when enumerating the custom_keycodes, but I don't actually know what this does...
  • Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses)
  • I never find myself using the right-modifiers on a standard keyboard, so I've only implemented LGUI and LALT. I have intentions of improving my use of the ctrl key in correct hand alternation, so CTRL is implemented in both outside corners of the home row.

Alternate Base Layers - QWERTY & Dvorak

QWERTY
 .----------------------------------------.     .-----------------------------------------.
 | Esc |   1  |   2  |   3  |   4  |   5  |     |   6  |   7  |   8  |   9  |   0  | Del  |
 |-----+------+------+------+------+------|     |------+------+------+------+------+------|
 | Tab |   Q  |   W  |   E  |   R  |   T  |     |   Y  |   U  |   I  |   O  |   P  |  \   |
 |-----+------+------+------+------+------|     |------+------+------+------+------+------|
 | BS  |   A  |   S  |   D  |   F  |   G  |     |   H  |   J  |   K  |   L  |   ;  |  "   |
 |-----+------+------+------+------+------|     |------+------+------+------+------+------|
 | LSPO|   Z  |   X  |   C  |   V  |   B  |     |   N  |   M  |   ,  |   .  |   /  | RSPC |
 |-----+------+------+------+------+------|     |------+------+------+------+------+------|
 | Ctrl| LGUI | Lower| LAlt |    SpaceLW  |     |    RSEnter  |  Fn  | Mouse| Menu | Ctrl |
 `----------------------------------------'     '-----------------------------------------'

DVORAK
 .----------------------------------------.     .-----------------------------------------.
 | Esc  |   1  |   2  |   3  |   4  |   5 |     |   6  |   7  |   8  |   9  |   0  | Del  |
 |------+------+------+------+------+-----|     |------+------+------+------+------+------|
 | Tab  |   "  |   ,  |   .  |   P  |   Y |     |   F  |   G  |   C  |   R  |   L  |  \   |
 |------+------+------+------+------+-----|     |------+------+------+------+------+------|
 |  BS  |   A  |   O  |   E  |   U  |   I |     |   D  |   H  |   T  |   N  |   S  |  /   |
 |------+------+------+------+------+-----|     |------+------+------+------+------+------|
 | LSPO |   ;  |   Q  |   J  |   K  |   X |     |   B  |   M  |   W  |   V  |   Z  | RSPC |
 |------+------+------+------+------+-----|     |------+------+------+------+------+------|
 | Ctrl | LGUI | Lower| LAlt |   SpaceLW  |     |   RSEnter   |  Fn  | Mouse| Menu | Ctrl |
 `----------------------------------------'     '-----------------------------------------'

Layer Shifting

  • The 4th key on the bottom row of the left hand PCB is used to access the LOWER layer via Tap/Toggle
  • The left 2U key is a TAP_KEY macro - Hold for momentary LOWER layer, Tap for Space.
  • The right 2U key is a TAP_KEY macro - Hold for momentary RAISE layer, Tap for Enter
  • The 2nd key on the bottom row of the right hand PCB is a LAYER_MOMENTARY for the FUNCTION layer
  • The 3rd key on the bottom row of the right hand PCB is a TAP_TOGGLE macro for the MOUSE layer

The base layout is Colemak. Since the CapsLock key is replaced with BackSpace, this layout has the delete key in the traditional backspace location.

  • QWERTY and Dvorak layers have been removed from the keymap that was initially developed from the default Planck keymap.

  • I've implemented COLEMAK = SAFE_RANGE when enumerating the custom_keycodes, but I don't actually know what this does...

  • Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses)

  • I never find myself using the right-modifiers on a standard keyboard, so I've only implemented LGUI and LALT. I have intentions of improving my use of the ctrl key in correct hand alternation, so CTRL is implemented in both outside corners of the home row.

LOWER - Numpad & Navigation keys

 ,-----------------------------------------.    .-----------------------------------------. 
 |  Esc |      |      |      |      |      |    |   =  |   /  |   \* |  \-  |      | Del  | 
 |------+------+------+------+------+------|    |------+------+------+------+------+------| 
 |  Tab | PgUp | Home |  Up  |  End |      |    |   7  |   8  |   9  |  \+  |      |  \\  | 
 |------+------+------+------+------+------|    |------+------+------+------+------+------| 
 |  BS  | PgDn | Left | Down |Right |      |    |   4  |   5  |   6  | Enter|      |   '  | 
 |------+------+------+------+------+------|    |------+------+------+------+------+------| 
 | LSPO |   Z  |   X  |   C  |   V  |      |    |   1  |   2  |   3  | Enter|      | RSPC | 
 |------+------+------+------+-------------|    |-------------+------+------+------+------| 
 | Ctrl | LGUI | Alt  | LOWER| Space/Lower |    |      0      |  \.  |  Fn  |ADJUST| Ctrl | 
 `-----------------------------------------'    `-----------------------------------------' 

The LOWER layer contains a navigation cluster on the left hand and a numpad on the right. This layer is momentary when the left thumb-bar or LOWER key is held and toggled on/off when the LOWER key is tapped.

The Navigation cluster is offset to the right compared to the traditional WASD nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster.

All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC_NO), all modifiers (edge || keys [except 0, . & Fn] on the above keymap) and the ZXCV cluster are transparent (______) to the Base layer.

The ADJUST layer can be accessed via the second from right key on the bottom row. This layer contains a keymap that is used to change the base layer.

[] TO DO!! - It would be nice to have a TAP_DANCE_DOUBLE implementation whereby a double tap of the right 2U key sends KC_PENT

  • Couldn't get this to work in Rev1, produced an error in the Make process.
  • When this is done, I can remove the clunky double Enter on the 4th column of the right hand PCB (numpad enter).

RAISE - Symbol Layer

 ,-----------------------------------.     .-----------------------------------.
 | Esc |  1  |  2  |  3  |  4  |  5  |     |  6  |  7  |  8  |  9  |  0  | Del |
 |-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----|
 | Tab |  !  |  @  |  #  |  $  |  %  |     |  ^  |  &  |  *  |  -  |  +  |  \  |
 |-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----|
 | BS  |     |     |     |     |     |     |     |     |     |     |     |  '  |
 |-----+-----+-----+-----+-----------|     |-----+-----+-----+-----+-----+-----|
 | LSPO|  <- | %>% |  {  |  [  |  `  |     |  |  |  ]  |  }  |  .  |  ?  |RSPC |
 |-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----|
 | Ctrl|LGUI | Alt |     |Space/Lower|     |Enter/Raise|  Fn |Mouse| Menu| Ctrl|
 '-----------------------------------'     '-----------------------------------'

The RAISE layer contains the symbols. This layer is momentary when the right thumb bar is held.

  • Standard symbols can be found on the row above home, in the traditional number row order as they occur on a standard keyboard.
  • Shifted symbols can be found on the second-from bottom row, above the bars - these include brackets, braces, grave and pipe keys.
    • At this stage, you need to shift to get to the Tilde key. I'd like to remove the shift requirement as I've done with the "|" Pipe, but we'll see.
    • Special operators for R (Pointer: <- and dplyr pipe: %>%) can be found next to the left shift key
  • The bottom row of this layer is a replication of that of the Base layer, except that the TAP_TOGGLE LOWER key is blocked with XXXXXXX.

FUNCTION - Function & Media keys

,-----------------------------------------.     .-----------------------------------------.
|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |     |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
|------+------+------+------+------+------|     |------+------+------+------+------+------|
| Esc  | Mute | Vol- | Vol+ |      | 	  |     |      |      |      |      |      | Ins  |
|------+------+------+------+------+------|     |------+------+------+------+------+------|
| Caps | Stop | |<<  | >/|| |  >>| |      |     |      |      |      |      |      |PrtSc |
|------+------+------+------+------+------|     |------+------+------+------+------+------|
| LSOB |      |      |      |      |      |     |      |      |      |      |      |ScrLk |
|------+------+------+------+------+------|     |------+------+------+------+------+------|
| Ctrl | LGUI | Alt  |      | Space/Lower |     | Enter/Raise |  Fn  | Mouse|      |PsBrk |
'-----------------------------------------'     '-----------------------------------------'

The FUNCTION layer contains media keys as well as the F-row. This layer is momentary and requires Fn to be held.

  • The media cluster is based on the nav cluster in the LOWER layer, with RW, PP & FF in the Left, Down & Right positions.
  • Mute, and Vol +/- are next to each other in ascending (L->R) volume order, Stop is below Mute.
  • Insert, Print Screen, Scroll Lock & Pause Break are all implemented on the far right column. I don't really use these keys so their position is not optimised.
  • Caps lock is implemented on this layer, in the traditional position, in place of BackSpace on the Base layer.

MOUSE - Mouse keys: The functionality of this layer is not as optimal as using a true mouse, generally slower but will work in a pinch.

 ,----------------------------------------.     .----------------------------------------. 
 |  Esc |      |      |      |      |     |     |     |      |      |      |      |  Del | 
 |------+------+------+------+------+-----|     |-----+------+------+------+------+------| 
 |  Tab | WhlU | WhlL | MsUp | WhlR |     |     |     |  M3  |  M4  |  M5  |      |      | 
 |------+------+------+------+------+-----|     |-----+------+------+------+------+------| 
 |      | WhlD | MsL  | MsDn | MsR  |     |     |     |LClick|RClick|      |      |      | 
 |------+------+------+------+------+-----|     |-----+------+------+------+------+------| 
 | LSPO |      |      |      |      |     |     |     |      |      |      |      | RSCB | 
 |------+------+------+------+------+-----|     |-----+------+------+------+------+------| 
 | Ctrl |      |      |      |Sensitivity |     | Sensitivity|      |MOUSE |      | Ctrl | 
 '----------------------------------------'     '----------------------------------------'

The MOUSE layer contains keys replicating functions found on the mouse.

  • The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the LOWER layer. The scroll keys are analagous to the Page Up & down keys.
  • The primary click (right & left) buttons are on the right home row (index & middle fingers)
  • Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function.

ADJUST - Keyboard Settings: Primarily used to change the base layer at this stage

,-----------------------------------------.     ,----------------------------------------.
|      |      |      |      |      |RESET |     |     |      |      |      |      |      |
|------+------+------+------+------+------|     |-----+------+------+------+------+------|
|      |      |      |      |      |      |     |     |TermOn|TermOf|      |      |  Del |
|------+------+------+------+------+------|     |-----+------+------+------+------+------|
|      |      |      |      |      |      |     |     |Qwerty|Colemk|Dvorak|      |      |
|------+------+------+------+------+------|     |-----+------+------+------+------+------|
|      |      |      |      |      |      |     |     |      |      |      |      |      |
|------+------+------+------+------+------|     |-----+------+------+------+------+------|
|      |      |/LOWER|      |             |     |            |      |      |/RAISE|      |
`-----------------------------------------'     `----------------------------------------'