History

Frederik Baerentsen deb4af71a4 initial upload		2020-03-23 10:48:11 +01:00
..
keymaps/default	initial upload	2020-03-23 10:48:11 +01:00
config.h	initial upload	2020-03-23 10:48:11 +01:00
info.json	initial upload	2020-03-23 10:48:11 +01:00
magicforce68.c	initial upload	2020-03-23 10:48:11 +01:00
magicforce68.h	initial upload	2020-03-23 10:48:11 +01:00
readme.md	initial upload	2020-03-23 10:48:11 +01:00
rules.mk	initial upload	2020-03-23 10:48:11 +01:00

readme.md

Magicforce 68 Handwired

This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino Pro Micro.

Keyboard Maintainer: The QMK Community
Hardware Supported: magicforce68, Arduino Micro

Wiring Layout

Pinout

The following pins are used:

Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6
Rows 1-5: F0, F1, F4, F5, F6

Make example for this keyboard (after setting up your build environment):

make handwired/magicforce68:default

To flash the firmware onto the microcontroller, run make handwired/magicforce68:default:avrdude, and press the reset button.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.