115 lines
3.7 KiB
C
115 lines
3.7 KiB
C
/* Copyright 2018 Jason Williams (Wilba)
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0x5241 // "RA"
|
|
#define PRODUCT_ID 0x006A // 6-A
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER RAMA WORKS
|
|
#define PRODUCT RAMA WORKS M6-A
|
|
#define DESCRIPTION RAMA WORKS M6-A
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 1
|
|
#define MATRIX_COLS 6
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { E6 }
|
|
#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
|
|
#define UNUSED_PINS
|
|
|
|
/* COL2ROW, ROW2COL*/
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
// #define BACKLIGHT_PIN B7
|
|
// #define BACKLIGHT_BREATHING
|
|
// #define BACKLIGHT_LEVELS 3
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* number of backlight levels */
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Magic Key Options
|
|
*
|
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
|
* the keyboard. They are best used in combination with the HID Listen program,
|
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
|
*
|
|
* The options below allow the magic key functionality to be changed. This is
|
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
|
*
|
|
*/
|
|
|
|
#define RGB_BACKLIGHT_ENABLED 0
|
|
|
|
// NOTE: M6-A doesn't use RGB backlight, but we keep this
|
|
// consistent with M6-B which does.
|
|
|
|
// Backlight config starts after VIA's EEPROM usage,
|
|
// dynamic keymaps start after this.
|
|
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 43
|
|
|
|
// VIA lighting is handled by the keyboard-level code
|
|
#define VIA_CUSTOM_LIGHTING_ENABLE
|