QMK/keyboards/jm60
2020-03-23 10:48:11 +01:00
..
boards/JM60_BOARD initial upload 2020-03-23 10:48:11 +01:00
keymaps initial upload 2020-03-23 10:48:11 +01:00
ld initial upload 2020-03-23 10:48:11 +01:00
chconf.h initial upload 2020-03-23 10:48:11 +01:00
config.h initial upload 2020-03-23 10:48:11 +01:00
halconf.h initial upload 2020-03-23 10:48:11 +01:00
jm60.c initial upload 2020-03-23 10:48:11 +01:00
jm60.h initial upload 2020-03-23 10:48:11 +01:00
led.c initial upload 2020-03-23 10:48:11 +01:00
matrix.c initial upload 2020-03-23 10:48:11 +01:00
mcuconf.h initial upload 2020-03-23 10:48:11 +01:00
readme.md initial upload 2020-03-23 10:48:11 +01:00
rules.mk initial upload 2020-03-23 10:48:11 +01:00

JM60

A compact 60% keyboard with full RGB led support.

Keyboard Maintainer: QMK Community
Hardware Supported: JM60
Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)

Make example for this keyboard (after setting up your build environment):

make jm60:default:bin

See build environment setup then the make instructions for more information.

Flashing Instructions

  1. from the qmk_firmware directory run:
$ make jm60:default:bin
  1. rename 'jm60_default.bin' to 'jm60_default.firmware'

  2. Press 'R' and reconnect the keyboard.

  3. Start the original Configuration Tool and flash 'jm60_default.bin'