QMK/keyboards/rgbkb/zygomorph
2020-03-23 10:48:11 +01:00
..
common initial upload 2020-03-23 10:48:11 +01:00
keymaps initial upload 2020-03-23 10:48:11 +01:00
rev1 initial upload 2020-03-23 10:48:11 +01:00
config.h initial upload 2020-03-23 10:48:11 +01:00
readme.md initial upload 2020-03-23 10:48:11 +01:00
rules.mk initial upload 2020-03-23 10:48:11 +01:00
zygomorph.c initial upload 2020-03-23 10:48:11 +01:00
zygomorph.h initial upload 2020-03-23 10:48:11 +01:00

Zygomorph

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.