323 lines
8.6 KiB
C
323 lines
8.6 KiB
C
|
/*
|
||
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
||
|
|
* the license was not distributed with this file, you can obtain one at:
|
||
|
|
*
|
||
|
|
* http://ugfx.io/license.html
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "gfx.h"
|
||
|
|
|
||
|
|
#if GFX_USE_GDISP
|
||
|
|
|
||
|
|
#if defined(GDISP_SCREEN_HEIGHT) || defined(GDISP_SCREEN_HEIGHT)
|
||
|
|
#if GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_DIRECT
|
||
|
|
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
|
||
|
|
#elif GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_MACRO
|
||
|
|
COMPILER_WARNING("GDISP: This low level driver does not support setting a screen size. It is being ignored.")
|
||
|
|
#endif
|
||
|
|
#undef GDISP_SCREEN_WIDTH
|
||
|
|
#undef GDISP_SCREEN_HEIGHT
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define GDISP_DRIVER_VMT GDISPVMT_ILI9481
|
||
|
|
#include "gdisp_lld_config.h"
|
||
|
|
#include "../../../src/gdisp/gdisp_driver.h"
|
||
|
|
|
||
|
|
#include "board_ILI9481.h"
|
||
|
|
|
||
|
|
/*===========================================================================*/
|
||
|
|
/* Driver local definitions. */
|
||
|
|
/*===========================================================================*/
|
||
|
|
|
||
|
|
#ifndef GDISP_SCREEN_HEIGHT
|
||
|
|
#define GDISP_SCREEN_HEIGHT 480
|
||
|
|
#endif
|
||
|
|
#ifndef GDISP_SCREEN_WIDTH
|
||
|
|
#define GDISP_SCREEN_WIDTH 320
|
||
|
|
#endif
|
||
|
|
#ifndef GDISP_INITIAL_CONTRAST
|
||
|
|
#define GDISP_INITIAL_CONTRAST 50
|
||
|
|
#endif
|
||
|
|
#ifndef GDISP_INITIAL_BACKLIGHT
|
||
|
|
#define GDISP_INITIAL_BACKLIGHT 100
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*===========================================================================*/
|
||
|
|
/* Driver local functions. */
|
||
|
|
/*===========================================================================*/
|
||
|
|
|
||
|
|
// Some common routines and macros
|
||
|
|
#define dummy_read(g) { volatile gU16 dummy; dummy = read_data(g); (void) dummy; }
|
||
|
|
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
|
||
|
|
#define write_reg2x16(g, reg, data1, data2) { write_index(g, reg); write_data(g, (data1)>>8); write_data(g, (gU8)(data1)); write_data(g, (data2)>>8); write_data(g, (gU8)(data2));}
|
||
|
|
|
||
|
|
static void set_viewport(GDisplay* g) {
|
||
|
|
write_reg2x16(g, 0x2A, g->p.x, g->p.x + g->p.cx - 1);
|
||
|
|
write_reg2x16(g, 0x2B, g->p.y, g->p.y + g->p.cy - 1);
|
||
|
|
write_index(g, 0x2C);
|
||
|
|
}
|
||
|
|
|
||
|
|
/*===========================================================================*/
|
||
|
|
/* Driver interrupt handlers. */
|
||
|
|
/*===========================================================================*/
|
||
|
|
|
||
|
|
/*===========================================================================*/
|
||
|
|
/* Driver exported functions. */
|
||
|
|
/*===========================================================================*/
|
||
|
|
|
||
|
|
LLDSPEC gBool gdisp_lld_init(GDisplay *g) {
|
||
|
|
// No private area for this controller
|
||
|
|
g->priv = 0;
|
||
|
|
|
||
|
|
// Initialise the board interface
|
||
|
|
init_board(g);
|
||
|
|
|
||
|
|
/* Hardware reset */
|
||
|
|
setpin_reset(g, gTrue);
|
||
|
|
gfxSleepMilliseconds(20);
|
||
|
|
setpin_reset(g, gFalse);
|
||
|
|
gfxSleepMilliseconds(20);
|
||
|
|
|
||
|
|
/* Get the bus for the following initialisation commands */
|
||
|
|
acquire_bus(g);
|
||
|
|
|
||
|
|
/* Enable Access to all Manufacturer commands (0xB0 and higher opcodes) */
|
||
|
|
write_reg(g, 0xB0, 0x00);
|
||
|
|
|
||
|
|
/* Frame Memory Access and Interface Setting */
|
||
|
|
write_index(g, 0xB3);
|
||
|
|
write_data(g, 0x02);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x10);
|
||
|
|
|
||
|
|
/* Display Mode and Frame Memory Write Mode Setting (B4h) */
|
||
|
|
/* Use internal clock for synchronization */
|
||
|
|
/* Use DBI interface (only DB0-17, no HSYNC, VSYNC or CLK) */
|
||
|
|
write_reg(g, 0xB4, 0x00);
|
||
|
|
|
||
|
|
/* Internal Backlight Control */
|
||
|
|
/* write_index(g, 0xB9); // PWM Settings for Brightness Control
|
||
|
|
write_data(g, 0x01); // Disabled by default.
|
||
|
|
write_data(g, 0xFF); // 0xFF = Max brightness
|
||
|
|
write_data(g, 0xFF);
|
||
|
|
write_data(g, 0x18); */
|
||
|
|
|
||
|
|
/* Panel Driving settings */
|
||
|
|
write_index(g, 0xC0);
|
||
|
|
write_data(g, 0x03);
|
||
|
|
write_data(g, 0x3B);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x01);
|
||
|
|
write_data(g, 0x00); /* NW */
|
||
|
|
write_data(g, 0x43);
|
||
|
|
|
||
|
|
/* Display timings in Operating Mode */
|
||
|
|
write_index(g, 0xC1);
|
||
|
|
write_data(g, 0x08);
|
||
|
|
write_data(g, 0x15); /* CLOCK */
|
||
|
|
write_data(g, 0x08);
|
||
|
|
write_data(g, 0x08);
|
||
|
|
|
||
|
|
/* S/VCOM/Gate Driving timing setting */
|
||
|
|
write_index(g, 0xC4);
|
||
|
|
write_data(g, 0x15);
|
||
|
|
write_data(g, 0x03);
|
||
|
|
write_data(g, 0x03);
|
||
|
|
write_data(g, 0x01);
|
||
|
|
|
||
|
|
/* Interface Setting */
|
||
|
|
write_reg(g, 0xC6, 0x02);
|
||
|
|
|
||
|
|
/* Gamma Setting - should be changed if using a different panel */
|
||
|
|
write_index(g, 0xC8);
|
||
|
|
write_data(g, 0x0C);
|
||
|
|
write_data(g, 0x05);
|
||
|
|
write_data(g, 0x0A); /*0X12 */
|
||
|
|
write_data(g, 0x6B); /*0x7D */
|
||
|
|
write_data(g, 0x04);
|
||
|
|
write_data(g, 0x06); /*0x08 */
|
||
|
|
write_data(g, 0x15); /*0x0A */
|
||
|
|
write_data(g, 0x10);
|
||
|
|
write_data(g, 0x00);
|
||
|
|
write_data(g, 0x60); /*0x23 */
|
||
|
|
|
||
|
|
/* Address Mode setting */
|
||
|
|
write_reg(g, 0x36, 0x00);
|
||
|
|
|
||
|
|
/* Set Pixel Format = 16 bits per pixel */
|
||
|
|
/* The driver supports upto 24 bits per pixel, with dither */
|
||
|
|
write_reg(g, 0x3A, 0x55);
|
||
|
|
|
||
|
|
/* Exit Idle Mode */
|
||
|
|
write_index(g, 0x38);
|
||
|
|
|
||
|
|
/* Power Setting */
|
||
|
|
write_index(g, 0xD0);
|
||
|
|
write_data(g, 0x07);
|
||
|
|
write_data(g, 0x07); /* VCI = VCI1 */
|
||
|
|
write_data(g, 0x14); /* VRH 0x1D */
|
||
|
|
write_data(g, 0xA2); /* BT 0x06 */
|
||
|
|
|
||
|
|
/* VCOM Setting */
|
||
|
|
write_index(g, 0xD1);
|
||
|
|
write_data(g, 0x03);
|
||
|
|
write_data(g, 0x5A); /* VCM 0x5A */
|
||
|
|
write_data(g, 0x10); /* VDV */
|
||
|
|
|
||
|
|
/* Power Setting for Normal Mode */
|
||
|
|
write_index(g, 0xD2);
|
||
|
|
write_data(g, 0x03);
|
||
|
|
write_data(g, 0x04); /* 0x24 */
|
||
|
|
write_data(g, 0x04);
|
||
|
|
|
||
|
|
/* Exit Sleep Mode */
|
||
|
|
write_index(g, 0x11);
|
||
|
|
gfxSleepMilliseconds(150);
|
||
|
|
|
||
|
|
/* Display ON */
|
||
|
|
write_index(g, 0x29);
|
||
|
|
gfxSleepMilliseconds(30);
|
||
|
|
|
||
|
|
// Finish Init
|
||
|
|
post_init_board(g);
|
||
|
|
|
||
|
|
// Release the bus
|
||
|
|
release_bus(g);
|
||
|
|
|
||
|
|
/* Turn on the back-light */
|
||
|
|
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
|
||
|
|
|
||
|
|
/* Initialise the GDISP structure */
|
||
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
||
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||
|
|
g->g.Orientation = gOrientation0;
|
||
|
|
g->g.Powermode = gPowerOn;
|
||
|
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
||
|
|
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
||
|
|
return gTrue;
|
||
|
|
}
|
||
|
|
|
||
|
|
#if GDISP_HARDWARE_STREAM_WRITE
|
||
|
|
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
|
||
|
|
acquire_bus(g);
|
||
|
|
set_viewport(g);
|
||
|
|
}
|
||
|
|
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
|
||
|
|
write_data(g, gdispColor2Native(g->p.color));
|
||
|
|
}
|
||
|
|
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
|
||
|
|
release_bus(g);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if GDISP_HARDWARE_STREAM_READ
|
||
|
|
LLDSPEC void gdisp_lld_read_start(GDisplay *g) {
|
||
|
|
acquire_bus(g);
|
||
|
|
set_viewport(g);
|
||
|
|
setreadmode(g);
|
||
|
|
dummy_read(g);
|
||
|
|
}
|
||
|
|
LLDSPEC gColor gdisp_lld_read_color(GDisplay *g) {
|
||
|
|
gU16 data;
|
||
|
|
|
||
|
|
data = read_data(g);
|
||
|
|
return gdispNative2Color(data);
|
||
|
|
}
|
||
|
|
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
|
||
|
|
setwritemode(g);
|
||
|
|
release_bus(g);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
||
|
|
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
||
|
|
switch(g->p.x) {
|
||
|
|
case GDISP_CONTROL_POWER:
|
||
|
|
if (g->g.Powermode == (gPowermode)g->p.ptr)
|
||
|
|
return;
|
||
|
|
switch((gPowermode)g->p.ptr) {
|
||
|
|
case gPowerOff:
|
||
|
|
acquire_bus(g);
|
||
|
|
write_reg(g, 0x0010, 0x0001); /* enter sleep mode */
|
||
|
|
release_bus(g);
|
||
|
|
break;
|
||
|
|
case gPowerOn:
|
||
|
|
acquire_bus(g);
|
||
|
|
write_reg(g, 0x0010, 0x0000); /* leave sleep mode */
|
||
|
|
release_bus(g);
|
||
|
|
if (g->g.Powermode != gPowerSleep)
|
||
|
|
gdisp_lld_init(g);
|
||
|
|
break;
|
||
|
|
case gPowerSleep:
|
||
|
|
acquire_bus(g);
|
||
|
|
write_reg(g, 0x0010, 0x0001); /* enter sleep mode */
|
||
|
|
release_bus(g);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
g->g.Powermode = (gPowermode)g->p.ptr;
|
||
|
|
return;
|
||
|
|
|
||
|
|
case GDISP_CONTROL_ORIENTATION:
|
||
|
|
if (g->g.Orientation == (gOrientation)g->p.ptr)
|
||
|
|
return;
|
||
|
|
switch((gOrientation)g->p.ptr) {
|
||
|
|
case gOrientation0:
|
||
|
|
acquire_bus(g);
|
||
|
|
|
||
|
|
write_reg(g, 0xC0, 0x03);
|
||
|
|
write_reg(g, 0x36, 0x00); /* X and Y axes non-inverted */
|
||
|
|
|
||
|
|
release_bus(g);
|
||
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
||
|
|
break;
|
||
|
|
case gOrientation90:
|
||
|
|
acquire_bus(g);
|
||
|
|
|
||
|
|
write_reg(g, 0xC0, 0x02);
|
||
|
|
write_reg(g, 0x36, 0x20); /* Invert X and Y axes */
|
||
|
|
|
||
|
|
release_bus(g);
|
||
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
||
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||
|
|
break;
|
||
|
|
case gOrientation180:
|
||
|
|
acquire_bus(g);
|
||
|
|
|
||
|
|
write_reg(g, 0xC0, 0x06);
|
||
|
|
write_reg(g, 0x36, 0x00); /* X and Y axes non-inverted */
|
||
|
|
|
||
|
|
release_bus(g);
|
||
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
||
|
|
break;
|
||
|
|
case gOrientation270:
|
||
|
|
acquire_bus(g);
|
||
|
|
|
||
|
|
write_reg(g, 0xC0, 0x07);
|
||
|
|
write_reg(g, 0x36, 0x20); /* Invert X and Y axes */
|
||
|
|
|
||
|
|
release_bus(g);
|
||
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
||
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
g->g.Orientation = (gOrientation)g->p.ptr;
|
||
|
|
return;
|
||
|
|
//case GDISP_CONTROL_BACKLIGHT:
|
||
|
|
//case GDISP_CONTROL_CONTRAST:
|
||
|
|
default:
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* GFX_USE_GDISP */
|