QMK/lib/chibios-contrib/os/common/ext/CMSIS/KINETIS/kl26z.h

1170 lines
77 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _KL26Z_H_
#define _KL26Z_H_
/**
* @brief KL2x Interrupt Number Definition, according to the selected device
* in @ref Library_configuration_section
*/
#define __MPU_PRESENT 0
#define __VTOR_PRESENT 1
#define __NVIC_PRIO_BITS 2
#define __Vendor_SysTickConfig 0
/*
* ==============================================================
* ---------- Interrupt Number Definition -----------------------
* ==============================================================
*/
typedef enum IRQn
{
/****** Cortex-M0 Processor Exceptions Numbers ****************/
Reset_IRQn = -15,
NonMaskableInt_IRQn = -14,
HardFault_IRQn = -13,
SVCall_IRQn = -5,
PendSV_IRQn = -2,
SysTick_IRQn = -1,
/****** KL2x Specific Interrupt Numbers ***********************/
DMA0_IRQn = 0,
DMA1_IRQn = 1,
DMA2_IRQn = 2,
DMA3_IRQn = 3,
Reserved0_IRQn = 4,
FTFA_IRQn = 5,
PMC_IRQn = 6,
LLWU_IRQn = 7,
I2C0_IRQn = 8,
I2C1_IRQn = 9,
SPI0_IRQn = 10,
SPI1_IRQn = 11,
UART0_IRQn = 12,
UART1_IRQn = 13,
UART2_IRQn = 14,
ADC0_IRQn = 15,
CMP0_IRQn = 16,
TPM0_IRQn = 17,
TPM1_IRQn = 18,
TPM2_IRQn = 19,
RTC0_IRQn = 20,
RTC1_IRQn = 21,
PIT_IRQn = 22,
I2S0_IRQn = 23,
USB_OTG_IRQn = 24,
DAC0_IRQn = 25,
TSI0_IRQn = 26,
MCG_IRQn = 27,
LPTMR0_IRQn = 28,
Reserved2_IRQn = 29,
PINA_IRQn = 30,
PINCD_IRQn = 31,
} IRQn_Type;
#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */
/*
* ==========================================================================
* ----------- Processor and Core Peripheral Section ------------------------
* ==========================================================================
*/
typedef struct
{
__IO uint8_t C1;
__IO uint8_t C2;
__IO uint8_t C3;
__IO uint8_t C4;
__IO uint8_t C5;
__IO uint8_t C6;
__I uint8_t S;
uint8_t RESERVED0[1];
__IO uint8_t SC;
uint8_t RESERVED1[1];
__IO uint8_t ATCVH;
__IO uint8_t ATCVL;
__IO uint8_t C7;
__IO uint8_t C8;
__IO uint8_t C9;
__IO uint8_t C10;
} MCG_TypeDef;
typedef struct
{
__IO uint32_t SC;
__IO uint32_t CNT;
__IO uint32_t MOD;
struct { // Channels
__IO uint32_t SC;
__IO uint32_t V;
} C[6];
uint32_t RESERVED0[5];
__IO uint32_t STATUS;
uint32_t RESERVED1[12];
__IO uint32_t CONF;
} TPM_TypeDef;
typedef struct
{
__IO uint32_t GENCS;
__IO uint32_t DATA;
__IO uint32_t TSHD;
} TSI_TypeDef;
typedef struct
{
__IO uint8_t S;
__IO uint8_t BR;
__IO uint8_t C2;
__IO uint8_t C1;
__IO uint8_t ML;
__IO uint8_t MH;
__IO uint8_t DL;
__IO uint8_t DH;
uint8_t RESERVED0[2];
__IO uint8_t CI;
__IO uint8_t C3;
} SPI_TypeDef;
typedef struct
{
__IO uint8_t A1;
__IO uint8_t F;
__IO uint8_t C1;
__IO uint8_t S; /* Denoted 'S1' in datasheet. */
__IO uint8_t D;
__IO uint8_t C2;
__IO uint8_t FLT;
__IO uint8_t RA;
__IO uint8_t SMB;
__IO uint8_t A2;
__IO uint8_t SLTH;
__IO uint8_t SLTL;
} I2C_TypeDef;
typedef struct
{
__IO uint8_t BDH;
__IO uint8_t BDL;
__IO uint8_t C1;
__IO uint8_t C2;
__I uint8_t S1;
__IO uint8_t S2;
__IO uint8_t C3;
__IO uint8_t D;
__IO uint8_t C4;
} UART_TypeDef;
typedef struct
{
__IO uint8_t BDH;
__IO uint8_t BDL;
__IO uint8_t C1;
__IO uint8_t C2;
__IO uint8_t S1;
__IO uint8_t S2;
__IO uint8_t C3;
__IO uint8_t D;
__IO uint8_t MA1;
__IO uint8_t MA2;
__IO uint8_t C4;
__IO uint8_t C5;
} UARTLP_TypeDef;
typedef struct {
__I uint8_t PERID; // 0x00
uint8_t RESERVED0[3];
__I uint8_t IDCOMP; // 0x04
uint8_t RESERVED1[3];
__I uint8_t REV; // 0x08
uint8_t RESERVED2[3];
__I uint8_t ADDINFO; // 0x0C
uint8_t RESERVED3[3];
__IO uint8_t OTGISTAT; // 0x10
uint8_t RESERVED4[3];
__IO uint8_t OTGICR; // 0x14
uint8_t RESERVED5[3];
__IO uint8_t OTGSTAT; // 0x18
uint8_t RESERVED6[3];
__IO uint8_t OTGCTL; // 0x1C
uint8_t RESERVED7[99];
__IO uint8_t ISTAT; // 0x80
uint8_t RESERVED8[3];
__IO uint8_t INTEN; // 0x84
uint8_t RESERVED9[3];
__IO uint8_t ERRSTAT; // 0x88
uint8_t RESERVED10[3];
__IO uint8_t ERREN; // 0x8C
uint8_t RESERVED11[3];
__I uint8_t STAT; // 0x90
uint8_t RESERVED12[3];
__IO uint8_t CTL; // 0x94
uint8_t RESERVED13[3];
__IO uint8_t ADDR; // 0x98
uint8_t RESERVED14[3];
__IO uint8_t BDTPAGE1; // 0x9C
uint8_t RESERVED15[3];
__IO uint8_t FRMNUML; // 0xA0
uint8_t RESERVED16[3];
__IO uint8_t FRMNUMH; // 0xA4
uint8_t RESERVED17[3];
__IO uint8_t TOKEN; // 0xA8
uint8_t RESERVED18[3];
__IO uint8_t SOFTHLD; // 0xAC
uint8_t RESERVED19[3];
__IO uint8_t BDTPAGE2; // 0xB0
uint8_t RESERVED20[3];
__IO uint8_t BDTPAGE3; // 0xB4
uint8_t RESERVED21[11];
struct {
__IO uint8_t V; // 0xC0
uint8_t RESERVED[3];
} ENDPT[16];
__IO uint8_t USBCTRL; // 0x100
uint8_t RESERVED22[3];
__I uint8_t OBSERVE; // 0x104
uint8_t RESERVED23[3];
__IO uint8_t CONTROL; // 0x108
uint8_t RESERVED24[3];
__IO uint8_t USBTRC0; // 0x10C
uint8_t RESERVED25[7];
__IO uint8_t USBFRMADJUST; // 0x114
} USBOTG_TypeDef;
typedef struct
{
__I uint8_t SRS0;
__I uint8_t SRS1;
uint8_t RESERVED0[2];
__IO uint8_t RPFC;
__IO uint8_t RPFW;
} RCM_TypeDef;
typedef struct {
__IO uint32_t TCSR; // 0x00
uint32_t RESERVED0[1];
__IO uint32_t TCR2; // 0x08
__IO uint32_t TCR3; // 0x0C
__IO uint32_t TCR4; // 0x10
__IO uint32_t TCR5; // 0x14
uint32_t RESERVED1[2];
__O uint32_t TDR0; // 0x20
uint32_t RESERVED2[15];
__IO uint32_t TMR; // 0x60
uint32_t RESERVED3[7];
__IO uint32_t RCSR; // 0x80
uint32_t RESERVED4[1];
__IO uint32_t RCR2; // 0x88
__IO uint32_t RCR3; // 0x8C
__IO uint32_t RCR4; // 0x90
__IO uint32_t RCR5; // 0x94
uint32_t RESERVED5[2];
__I uint32_t RDR0; // 0xA0
uint32_t RESERVED6[15];
__IO uint32_t RMR; // 0xE0
uint32_t RESERVED7[7];
__IO uint32_t MCR; // 0x100
} I2S_TypeDef;
/****************************************************************/
/* Peripheral memory map */
/****************************************************************/
#define DMA_BASE ((uint32_t)0x40008100)
#define FTFA_BASE ((uint32_t)0x40020000)
#define DMAMUX_BASE ((uint32_t)0x40021000)
#define I2S0_BASE ((uint32_t)0x4002F000) // TODO: registers not implemented
#define PIT_BASE ((uint32_t)0x40037000)
#define TPM0_BASE ((uint32_t)0x40038000)
#define TPM1_BASE ((uint32_t)0x40039000)
#define TPM2_BASE ((uint32_t)0x4003A000)
#define ADC0_BASE ((uint32_t)0x4003B000)
#define RTC_BASE ((uint32_t)0x4003D000)
#define DAC0_BASE ((uint32_t)0x4003F000)
#define LPTMR0_BASE ((uint32_t)0x40040000)
#define TSI0_BASE ((uint32_t)0x40045000)
#define SIM_BASE ((uint32_t)0x40047000)
#define PORTA_BASE ((uint32_t)0x40049000)
#define PORTB_BASE ((uint32_t)0x4004A000)
#define PORTC_BASE ((uint32_t)0x4004B000)
#define PORTD_BASE ((uint32_t)0x4004C000)
#define PORTE_BASE ((uint32_t)0x4004D000)
#define MCG_BASE ((uint32_t)0x40064000)
#define OSC0_BASE ((uint32_t)0x40065000)
#define I2C0_BASE ((uint32_t)0x40066000)
#define I2C1_BASE ((uint32_t)0x40067000)
#define UART0_BASE ((uint32_t)0x4006A000)
#define UART1_BASE ((uint32_t)0x4006B000)
#define UART2_BASE ((uint32_t)0x4006C000)
#define USBOTG_BASE ((uint32_t)0x40072000)
#define CMP_BASE ((uint32_t)0x40073000)
#define SPI0_BASE ((uint32_t)0x40076000)
#define SPI1_BASE ((uint32_t)0x40077000)
#define LLWU_BASE ((uint32_t)0x4007C000)
#define PMC_BASE ((uint32_t)0x4007D000)
#define SMC_BASE ((uint32_t)0x4007E000)
#define RCM_BASE ((uint32_t)0x4007F000)
#define GPIOA_BASE ((uint32_t)0x400FF000)
#define GPIOB_BASE ((uint32_t)0x400FF040)
#define GPIOC_BASE ((uint32_t)0x400FF080)
#define GPIOD_BASE ((uint32_t)0x400FF0C0)
#define GPIOE_BASE ((uint32_t)0x400FF100)
#define MCM_BASE ((uint32_t)0xF0003000)
/****************************************************************/
/* Peripheral declaration */
/****************************************************************/
#define DMA ((DMA_TypeDef *) DMA_BASE)
#define FTFA ((FTFA_TypeDef *) FTFA_BASE)
#define DMAMUX ((DMAMUX_TypeDef *) DMAMUX_BASE)
#define I2S0 ((I2S_TypeDef *) I2S0_BASE)
#define PIT ((PIT_TypeDef *) PIT_BASE)
#define TPM0 ((TPM_TypeDef *) TPM0_BASE)
#define TPM1 ((TPM_TypeDef *) TPM1_BASE)
#define TPM2 ((TPM_TypeDef *) TPM2_BASE)
#define ADC0 ((ADC_TypeDef *) ADC0_BASE)
#define RTC0 ((RTC_TypeDef *) RTC0_BASE)
#define DAC0 ((DAC_TypeDef *) DAC0_BASE)
#define LPTMR0 ((LPTMR_TypeDef *) LPTMR0_BASE)
#define TSI0 ((TSI_TypeDef *) TSI0_BASE)
#define SIM ((SIM_TypeDef *) SIM_BASE)
#define LLWU ((LLWU_TypeDef *) LLWU_BASE)
#define PMC ((PMC_TypeDef *) PMC_BASE)
#define PORTA ((PORT_TypeDef *) PORTA_BASE)
#define PORTB ((PORT_TypeDef *) PORTB_BASE)
#define PORTC ((PORT_TypeDef *) PORTC_BASE)
#define PORTD ((PORT_TypeDef *) PORTD_BASE)
#define PORTE ((PORT_TypeDef *) PORTE_BASE)
#define USB0 ((USBOTG_TypeDef *) USBOTG_BASE)
#define CMP ((CMP_TypeDef *) CMP_BASE)
#define MCG ((MCG_TypeDef *) MCG_BASE)
#define OSC0 ((OSC_TypeDef *) OSC0_BASE)
#define SPI0 ((SPI_TypeDef *) SPI0_BASE)
#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
#define I2C0 ((I2C_TypeDef *) I2C0_BASE)
#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
#define UART0 ((UARTLP_TypeDef *) UART0_BASE)
#define UART1 ((UART_TypeDef *) UART1_BASE)
#define UART2 ((UART_TypeDef *) UART2_BASE)
#define SMC ((SMC_TypeDef *) SMC_BASE)
#define RCM ((RCM_TypeDef *) RCM_BASE)
#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
#define MCM ((MCM_TypeDef *) MCM_BASE)
/****************************************************************/
/* Peripheral Registers Bits Definition */
/****************************************************************/
/****************************************************************/
/* */
/* System Integration Module (SIM) */
/* */
/****************************************************************/
/********* Bits definition for SIM_SOPT1 register *************/
#define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) /*!< USB voltage regulator enable */
#define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) /*!< USB voltage regulator in standby mode during Stop, VLPS, LLS and VLLS modes */
#define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) /*!< USB voltage regulator in standby mode during VLPR and VLPW modes */
#define SIM_SOPT1_OSC32KSEL_SHIFT 18 /*!< 32K oscillator clock select (shift) */
#define SIM_SOPT1_OSC32KSEL_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock select (mask) */
#define SIM_SOPT1_OSC32KSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock select */
/******* Bits definition for SIM_SOPT1CFG register ************/
#define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) /*!< USB voltage regulator stop standby write enable */
#define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) /*!< USB voltage regulator VLP standby write enable */
#define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) /*!< USB voltage regulator voltage regulator write enable */
/******* Bits definition for SIM_SOPT2 register ************/
#define SIM_SOPT2_UART0SRC_SHIFT 26 /*!< UART0 clock source select (shift) */
#define SIM_SOPT2_UART0SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_UART0SRC_SHIFT)) /*!< UART0 clock source select (mask) */
#define SIM_SOPT2_UART0SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_UART0SRC_SHIFT) & SIM_SOPT2_UART0SRC_MASK)) /*!< UART0 clock source select */
#define SIM_SOPT2_TPMSRC_SHIFT 24 /*!< TPM clock source select (shift) */
#define SIM_SOPT2_TPMSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_TPMSRC_SHIFT)) /*!< TPM clock source select (mask) */
#define SIM_SOPT2_TPMSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_TPMSRC_SHIFT) & SIM_SOPT2_TPMSRC_MASK)) /*!< TPM clock source select */
#define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) /*!< USB clock source select */
#define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) /*!< PLL/FLL clock select */
#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 /*!< CLKOUT select (shift) */
#define SIM_SOPT2_CLKOUTSEL_MASK ((uint32_t)((uint32_t)0x07 << SIM_SOPT2_CLKOUTSEL_SHIFT)) /*!< CLKOUT select (mask) */
#define SIM_SOPT2_CLKOUTSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_CLKOUTSEL_SHIFT) & SIM_SOPT2_CLKOUTSEL_MASK)) /*!< CLKOUT select */
#define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) /*!< RTC clock out select */
/******* Bits definition for SIM_SOPT4 register ************/
#define SIM_SOPT4_TPM2CLKSEL ((uint32_t)0x04000000) /*!< TPM2 External Clock Pin Select */
#define SIM_SOPT4_TPM1CLKSEL ((uint32_t)0x02000000) /*!< TPM1 External Clock Pin Select */
#define SIM_SOPT4_TPM0CLKSEL ((uint32_t)0x01000000) /*!< TPM0 External Clock Pin Select */
#define SIM_SOPT4_TPM2CH0SRC ((uint32_t)0x00100000) /*!< TPM2 channel 0 input capture source select */
#define SIM_SOPT4_TPM1CH0SRC_SHIFT 18 /*!< TPM1 channel 0 input capture source select (shift) */
#define SIM_SOPT4_TPM1CH0SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT4_TPM1CH0SRC_SHIFT)) /*!< TPM1 channel 0 input capture source select (mask) */
#define SIM_SOPT4_TPM1CH0SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT4_TPM1CH0SRC_SHIFT) & SIM_SOPT4_TPM1CH0SRC_MASK)) /*!< TPM1 channel 0 input capture source select */
/******* Bits definition for SIM_SOPT5 register ************/
#define SIM_SOPT5_UART2ODE ((uint32_t)0x00040000) /*!< UART2 Open Drain Enable */
#define SIM_SOPT5_UART1ODE ((uint32_t)0x00020000) /*!< UART1 Open Drain Enable */
#define SIM_SOPT5_UART0ODE ((uint32_t)0x00010000) /*!< UART0 Open Drain Enable */
#define SIM_SOPT5_UART1RXSRC ((uint32_t)0x00000040) /*!< UART1 receive data source select */
#define SIM_SOPT5_UART1TXSRC_SHIFT 4 /*!< UART1 transmit data source select (shift) */
#define SIM_SOPT5_UART1TXSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT5_UART1TXSRC_SHIFT)) /*!< UART1 transmit data source select (mask) */
#define SIM_SOPT5_UART1TXSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT5_UART1TXSRC_SHIFT) & SIM_SOPT5_UART1TXSRC_MASK)) /*!< UART1 transmit data source select */
#define SIM_SOPT5_UART0RXSRC ((uint32_t)0x00000040) /*!< UART0 receive data source select */
#define SIM_SOPT5_UART0TXSRC_SHIFT 0 /*!< UART0 transmit data source select (shift) */
#define SIM_SOPT5_UART0TXSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT5_UART0TXSRC_SHIFT)) /*!< UART0 transmit data source select (mask) */
#define SIM_SOPT5_UART0TXSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT5_UART0TXSRC_SHIFT) & SIM_SOPT5_UART0TXSRC_MASK)) /*!< UART0 transmit data source select */
/******* Bits definition for SIM_SOPT7 register ************/
#define SIM_SOPT7_ADC0ALTTRGEN ((uint32_t)0x00000080) /*!< ADC0 Alternate Trigger Enable */
#define SIM_SOPT7_ADC0PRETRGSEL ((uint32_t)0x00000010) /*!< ADC0 Pretrigger Select */
#define SIM_SOPT7_ADC0TRGSEL_SHIFT 0 /*!< ADC0 Trigger Select (shift) */
#define SIM_SOPT7_ADC0TRGSEL_MASK ((uint32_t)((uint32_t)0x0F << SIM_SOPT7_ADC0TRGSEL_SHIFT)) /*!< ADC0 Trigger Select (mask) */
#define SIM_SOPT7_ADC0TRGSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT7_ADC0TRGSEL_SHIFT) & SIM_SOPT7_ADC0TRGSEL_MASK)) /*!< ADC0 Trigger Select */
/******** Bits definition for SIM_SDID register ************/
#define SIM_SDID_FAMID_SHIFT 28 /*!< Kinetis family ID (shift) */
#define SIM_SDID_FAMID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_FAMID_SHIFT)) /*!< Kinetis family ID (mask) */
#define SIM_SDID_SUBFAMID_SHIFT 24 /*!< Kinetis Sub-Family ID (shift) */
#define SIM_SDID_SUBFAMID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SUBFAMID_SHIFT)) /*!< Kinetis Sub-Family ID (mask) */
#define SIM_SDID_SERIESID_SHIFT 20 /*!< Kinetis Series ID (shift) */
#define SIM_SDID_SERIESID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SERIESID_SHIFT)) /*!< Kinetis Series ID (mask) */
#define SIM_SDID_SRAMSIZE_SHIFT 16 /*!< System SRAM Size (shift) */
#define SIM_SDID_SRAMSIZE_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SRAMSIZE_SHIFT)) /*!< System SRAM Size (mask) */
#define SIM_SDID_REVID_SHIFT 12 /*!< Device revision number (shift) */
#define SIM_SDID_REVID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_REVID_SHIFT)) /*!< Device revision number (mask) */
#define SIM_SDID_DIEID_SHIFT 7 /*!< Device die number (shift) */
#define SIM_SDID_DIEID_MASK ((uint32_t)((uint32_t)0x1F << SIM_SDID_DIEID_SHIFT)) /*!< Device die number (mask) */
#define SIM_SDID_PINID_SHIFT 0 /*!< Pincount identification (shift) */
#define SIM_SDID_PINID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_PINID_SHIFT)) /*!< Pincount identification (mask) */
/******* Bits definition for SIM_SCGC4 register ************/
#define SIM_SCGC4_SPI1 ((uint32_t)0x00800000) /*!< SPI1 Clock Gate Control */
#define SIM_SCGC4_SPI0 ((uint32_t)0x00400000) /*!< SPI0 Clock Gate Control */
#define SIM_SCGC4_CMP ((uint32_t)0x00080000) /*!< Comparator Clock Gate Control */
#define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) /*!< USB Clock Gate Control */
#define SIM_SCGC4_UART2 ((uint32_t)0x00001000) /*!< UART2 Clock Gate Control */
#define SIM_SCGC4_UART1 ((uint32_t)0x00000800) /*!< UART1 Clock Gate Control */
#define SIM_SCGC4_UART0 ((uint32_t)0x00000400) /*!< UART0 Clock Gate Control */
#define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) /*!< I2C1 Clock Gate Control */
#define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) /*!< I2C0 Clock Gate Control */
/******* Bits definition for SIM_SCGC5 register ************/
#define SIM_SCGC5_PORTE ((uint32_t)0x00002000) /*!< Port E Clock Gate Control */
#define SIM_SCGC5_PORTD ((uint32_t)0x00001000) /*!< Port D Clock Gate Control */
#define SIM_SCGC5_PORTC ((uint32_t)0x00000800) /*!< Port C Clock Gate Control */
#define SIM_SCGC5_PORTB ((uint32_t)0x00000400) /*!< Port B Clock Gate Control */
#define SIM_SCGC5_PORTA ((uint32_t)0x00000200) /*!< Port A Clock Gate Control */
#define SIM_SCGC5_TSI ((uint32_t)0x00000020) /*!< TSI Access Control */
#define SIM_SCGC5_LPTMR ((uint32_t)0x00000001) /*!< Low Power Timer Access Control */
/******* Bits definition for SIM_SCGC6 register ************/
#define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) /*!< DAC0 Clock Gate Control */
#define SIM_SCGC6_RTC ((uint32_t)0x20000000) /*!< RTC Access Control */
#define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) /*!< ADC0 Clock Gate Control */
#define SIM_SCGC6_TPM2 ((uint32_t)0x04000000) /*!< TPM2 Clock Gate Control */
#define SIM_SCGC6_TPM1 ((uint32_t)0x02000000) /*!< TPM1 Clock Gate Control */
#define SIM_SCGC6_TPM0 ((uint32_t)0x01000000) /*!< TPM0 Clock Gate Control */
#define SIM_SCGC6_PIT ((uint32_t)0x00800000) /*!< PIT Clock Gate Control */
#define SIM_SCGC6_I2S ((uint32_t)0x00008000) /*!< I2S0 Clock Gate Control */
#define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) /*!< DMA Mux Clock Gate Control */
#define SIM_SCGC6_FTF ((uint32_t)0x00000001) /*!< Flash Memory Clock Gate Control */
/******* Bits definition for SIM_SCGC7 register ************/
#define SIM_SCGC7_DMA ((uint32_t)0x00000100) /*!< DMA Clock Gate Control */
/****** Bits definition for SIM_CLKDIV1 register ***********/
#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 /*!< Clock 1 output divider value (shift) */
#define SIM_CLKDIV1_OUTDIV1_MASK ((uint32_t)((uint32_t)0x0F << SIM_CLKDIV1_OUTDIV1_SHIFT)) /*!< Clock 1 output divider value (mask) */
#define SIM_CLKDIV1_OUTDIV1(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV1_SHIFT) & SIM_CLKDIV1_OUTDIV1_MASK)) /*!< Clock 1 output divider value */
#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 /*!< Clock 4 output divider value (shift) */
#define SIM_CLKDIV1_OUTDIV4_MASK ((uint32_t)((uint32_t)0x07 << SIM_CLKDIV1_OUTDIV4_SHIFT)) /*!< Clock 4 output divider value (mask) */
#define SIM_CLKDIV1_OUTDIV4(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV4_SHIFT) & SIM_CLKDIV1_OUTDIV4_MASK)) /*!< Clock 4 output divider value */
/******* Bits definition for SIM_FCFG1 register ************/
#define SIM_FCFG1_PFSIZE_SHIFT 24 /*!< Program Flash Size (shift) */
#define SIM_FCFG1_PFSIZE_MASK ((uint32_t)((uint32_t)0x0F << SIM_FCFG1_PFSIZE_SHIFT)) /*!< Program Flash Size (mask) */
#define SIM_FCFG1_FLASHDOZE ((uint32_t)0x00000002) /*!< Flash Doze */
#define SIM_FCFG1_FLASHDIS ((uint32_t)0x00000001) /*!< Flash Disable */
/******* Bits definition for SIM_FCFG2 register ************/
#define SIM_FCFG2_MAXADDR0_SHIFT 24 /*!< Max address lock (shift) */
#define SIM_FCFG2_MAXADDR0_MASK ((uint32_t)((uint32_t)0x7F << SIM_FCFG2_MAXADDR0_SHIFT)) /*!< Max address lock (mask) */
#define SIM_FCFG2_MAXADDR1_SHIFT 16 /*!< Max address lock (block 1) (shift) */
#define SIM_FCFG2_MAXADDR1_MASK ((uint32_t)((uint32_t)0x7F << SIM_FCFG2_MAXADDR1_SHIFT)) /*!< Max address lock (block 1) (mask) */
/******* Bits definition for SIM_UIDMH register ************/
#define SIM_UIDMH_UID_MASK ((uint32_t)0x0000FFFF) /*!< Unique Identification */
/******* Bits definition for SIM_UIDML register ************/
#define SIM_UIDML_UID_MASK ((uint32_t)0xFFFFFFFF) /*!< Unique Identification */
/******* Bits definition for SIM_UIDL register *************/
#define SIM_UIDL_UID_MASK ((uint32_t)0xFFFFFFFF) /*!< Unique Identification */
/******* Bits definition for SIM_COPC register *************/
#define SIM_COPC_COPT_SHIFT 2 /*!< COP Watchdog Timeout (shift) */
#define SIM_COPC_COPT_MASK ((uint32_t)((uint32_t)0x03 << SIM_COPC_COPT_SHIFT)) /*!< COP Watchdog Timeout (mask) */
#define SIM_COPC_COPT(x) ((uint32_t)(((uint32_t)(x) << SIM_COPC_COPT_SHIFT) & SIM_COPC_COPT_MASK)) /*!< COP Watchdog Timeout */
#define SIM_COPC_COPCLKS ((uint32_t)0x00000002) /*!< COP Clock Select */
#define SIM_COPC_COPW ((uint32_t)0x00000001) /*!< COP windowed mode */
/******* Bits definition for SIM_SRVCOP register ***********/
#define SIM_SRVCOP_SRVCOP_SHIFT 0 /*!< Sevice COP Register (shift) */
#define SIM_SRVCOP_SRVCOP_MASK ((uint32_t)((uint32_t)0xFF << SIM_SRVCOP_SRVCOP_SHIFT)) /*!< Sevice COP Register (mask) */
#define SIM_SRVCOP_SRVCOP(x) ((uint32_t)(((uint32_t)(x) << SIM_SRVCOP_SRVCOP_SHIFT) & SIM_SRVCOP_SRVCOP_MASK)) /*!< Sevice COP Register */
/****************************************************************/
/* */
/* Low-Leakage Wakeup Unit (LLWU) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Port Control and interrupts (PORT) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Oscillator (OSC) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Direct Memory Access (DMA) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Direct Memory Access Multiplexer (DMAMUX) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Periodic Interrupt Timer (PIT) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Analog-to-Digital Converter (ADC) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Low-Power Timer (LPTMR) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Touch Sensing Input (TSI) */
/* */
/****************************************************************/
/********** Bits definition for TSIx_GENCS register ***********/
#define TSIx_GENCS_OUTRGF ((uint32_t)((uint32_t)1 << 31)) /*!< Out of Range Flag */
#define TSIx_GENCS_ESOR ((uint32_t)((uint32_t)1 << 28)) /*!< End-of-scan/Out-of-Range Interrupt Selection */
#define TSIx_GENCS_MODE_SHIFT 24 /*!< TSI analog modes setup and status bits (shift) */
#define TSIx_GENCS_MODE_MASK ((uint32_t)((uint32_t)0x0F << TSIx_GENCS_MODE_SHIFT)) /*!< TSI analog modes setup and status bits (mask) */
#define TSIx_GENCS_MODE(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_MODE_SHIFT) & TSIx_GENCS_MODE_MASK)) /*!< TSI analog modes setup and status bits */
#define TSIx_GENCS_REFCHRG_SHIFT 21 /*!< Reference oscillator charge/discharge current (shift) */
#define TSIx_GENCS_REFCHRG_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_REFCHRG_SHIFT)) /*!< Reference oscillator charge/discharge current (mask) */
#define TSIx_GENCS_REFCHRG(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_REFCHRG_SHIFT) & TSIx_GENCS_REFCHRG_MASK)) /*!< Reference oscillator charge/discharge current */
#define TSIx_GENCS_DVOLT_SHIFT 19 /*!< Oscillator voltage rails (shift) */
#define TSIx_GENCS_DVOLT_MASK ((uint32_t)((uint32_t)0x03 << TSIx_GENCS_DVOLT_SHIFT)) /*!< Oscillator voltage rails (mask) */
#define TSIx_GENCS_DVOLT(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_DVOLT_SHIFT) & TSIx_GENCS_DVOLT_MASK)) /*!< Oscillator voltage rails */
#define TSIx_GENCS_EXTCHRG_SHIFT 16 /*!< Electrode oscillator charge/discharge current (shift) */
#define TSIx_GENCS_EXTCHRG_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_EXTCHRG_SHIFT)) /*!< Electrode oscillator charge/discharge current (mask) */
#define TSIx_GENCS_EXTCHRG(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_EXTCHRG_SHIFT) & TSIx_GENCS_EXTCHRG_MASK)) /*!< Electrode oscillator charge/discharge current */
#define TSIx_GENCS_PS_SHIFT 13 /*!< Electrode oscillator prescaler (shift) */
#define TSIx_GENCS_PS_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_PS_SHIFT)) /*!< Electrode oscillator prescaler (mask) */
#define TSIx_GENCS_PS(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_PS_SHIFT) & TSIx_GENCS_PS_MASK)) /*!< Electrode oscillator prescaler */
#define TSIx_GENCS_NSCN_SHIFT 8 /*!< Number of scans per electrode minus 1 (shift) */
#define TSIx_GENCS_NSCN_MASK ((uint32_t)((uint32_t)0x1F << TSIx_GENCS_NSCN_SHIFT)) /*!< Number of scans per electrode minus 1 (mask) */
#define TSIx_GENCS_NSCN(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_NSCN_SHIFT) & TSIx_GENCS_NSCN_MASK)) /*!< Number of scans per electrode minus 1 */
#define TSIx_GENCS_TSIEN ((uint32_t)((uint32_t)1 << 7)) /*!< TSI Module Enable */
#define TSIx_GENCS_TSIIEN ((uint32_t)((uint32_t)1 << 6)) /*!< TSI Interrupt Enable */
#define TSIx_GENCS_STPE ((uint32_t)((uint32_t)1 << 5)) /*!< TSI STOP Enable */
#define TSIx_GENCS_STM ((uint32_t)((uint32_t)1 << 4)) /*!< Scan Trigger Mode (0=software; 1=hardware) */
#define TSIx_GENCS_SCNIP ((uint32_t)((uint32_t)1 << 3)) /*!< Scan in Progress Status */
#define TSIx_GENCS_EOSF ((uint32_t)((uint32_t)1 << 2)) /*!< End of Scan Flag */
#define TSIx_GENCS_CURSW ((uint32_t)((uint32_t)1 << 1)) /*!< Swap electrode and reference current sources */
/********** Bits definition for TSIx_DATA register ************/
#define TSIx_DATA_TSICH_SHIFT 28 /*!< Specify channel to be measured (shift) */
#define TSIx_DATA_TSICH_MASK ((uint32_t)((uint32_t)0x0F << TSIx_DATA_TSICH_SHIFT)) /*!< Specify channel to be measured (mask) */
#define TSIx_DATA_TSICH(x) ((uint32_t)(((uint32_t)(x) << TSIx_DATA_TSICH_SHIFT) & TSIx_DATA_TSICH_MASK)) /*!< Specify channel to be measured */
#define TSIx_DATA_DMAEN ((uint32_t)((uint32_t)1 << 23)) /*!< DMA Transfer Enabled */
#define TSIx_DATA_SWTS ((uint32_t)((uint32_t)1 << 22)) /*!< Software Trigger Start */
#define TSIx_DATA_TSICNT_SHIFT 0 /*!< TSI Conversion Counter Value (shift) */
#define TSIx_DATA_TSICNT_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_DATA_TSICNT_SHIFT)) /*!< TSI Conversion Counter Value (mask) */
#define TSIx_DATA_TSICNT(x) ((uint32_t)(((uint32_t)(x) << TSIx_DATA_TSICNT_SHIFT) & TSIx_DATA_TSICNT_MASK)) /*!< TSI Conversion Counter Value */
/********** Bits definition for TSIx_TSHD register ************/
#define TSIx_TSHD_THRESH_SHIFT 16 /*!< TSI Wakeup Channel High-Threshold (shift) */
#define TSIx_TSHD_THRESH_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_TSHD_THRESH_SHIFT)) /*!< TSI Wakeup Channel High-Threshold (mask) */
#define TSIx_TSHD_THRESH(x) ((uint32_t)(((uint32_t)(x) << TSIx_TSHD_THRESH_SHIFT) & TSIx_TSHD_THRESH_MASK)) /*!< TSI Wakeup Channel High-Threshold */
#define TSIx_TSHD_THRESL_SHIFT 0 /*!< TSI Wakeup Channel Low-Threshold (shift) */
#define TSIx_TSHD_THRESL_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_TSHD_THRESL_SHIFT)) /*!< TSI Wakeup Channel Low-Threshold (mask) */
#define TSIx_TSHD_THRESL(x) ((uint32_t)(((uint32_t)(x) << TSIx_TSHD_THRESL_SHIFT) & TSIx_TSHD_THRESL_MASK)) /*!< TSI Wakeup Channel Low-Threshold */
/****************************************************************/
/* */
/* Multipurpose Clock Generator (MCG) */
/* */
/****************************************************************/
/*********** Bits definition for MCG_C1 register **************/
#define MCG_C1_CLKS_SHIFT 6 /*!< Clock source select (shift) */
#define MCG_C1_CLKS_MASK ((uint8_t)((uint8_t)0x03 << MCG_C1_CLKS_SHIFT)) /*!< Clock source select (mask) */
#define MCG_C1_CLKS(x) ((uint8_t)(((uint8_t)(x) << MCG_C1_CLKS_SHIFT) & MCG_C1_CLKS_MASK)) /*!< Clock source select */
#define MCG_C1_CLKS_FLLPLL MCG_C1_CLKS(0) /*!< Select output of FLL or PLL, depending on PLLS control bit */
#define MCG_C1_CLKS_IRCLK MCG_C1_CLKS(1) /*!< Select internal reference clock */
#define MCG_C1_CLKS_ERCLK MCG_C1_CLKS(2) /*!< Select external reference clock */
#define MCG_C1_FRDIV_SHIFT 3 /*!< FLL External Reference Divider (shift) */
#define MCG_C1_FRDIV_MASK ((uint8_t)((uint8_t)0x07 << MCG_C1_FRDIV_SHIFT)) /*!< FLL External Reference Divider (mask) */
#define MCG_C1_FRDIV(x) ((uint8_t)(((uint8_t)(x) << MCG_C1_FRDIV_SHIFT) & MCG_C1_FRDIV_MASK)) /*!< FLL External Reference Divider */
#define MCG_C1_IREFS ((uint8_t)((uint8_t)1 << 2)) /*!< Internal Reference Select (0=ERCLK; 1=slow IRCLK) */
#define MCG_C1_IRCLKEN ((uint8_t)((uint8_t)1 << 1)) /*!< Internal Reference Clock Enable */
#define MCG_C1_IREFSTEN ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Stop Enable */
/*********** Bits definition for MCG_C2 register **************/
#define MCG_C2_LOCRE0 ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Clock Reset Enable */
#define MCG_C2_FCFTRIM ((uint8_t)((uint8_t)1 << 6)) /*!< Loss of Clock Reset Enable */
#define MCG_C2_RANGE0_SHIFT 4 /*!< Frequency Range Select (shift) */
#define MCG_C2_RANGE0_MASK ((uint8_t)((uint8_t)0x03 << MCG_C2_RANGE0_SHIFT)) /*!< Frequency Range Select (mask) */
#define MCG_C2_RANGE0(x) ((uint8_t)(((uint8_t)(x) << MCG_C2_RANGE0_SHIFT) & MCG_C2_RANGE0_MASK)) /*!< Frequency Range Select */
#define MCG_C2_HGO0 ((uint8_t)((uint8_t)1 << 3)) /*!< High Gain Oscillator Select (0=low power; 1=high gain) */
#define MCG_C2_EREFS0 ((uint8_t)((uint8_t)1 << 2)) /*!< External Reference Select (0=clock; 1=oscillator) */
#define MCG_C2_LP ((uint8_t)((uint8_t)1 << 1)) /*!< Low Power Select (1=FLL/PLL disabled in bypass modes) */
#define MCG_C2_IRCS ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Clock Select (0=slow; 1=fast) */
/*********** Bits definition for MCG_C3 register **************/
#define MCG_C3_SCTRIM_SHIFT 0 /*!< Slow Internal Reference Clock Trim Setting (shift) */
#define MCG_C3_SCTRIM_MASK ((uint8_t)((uint8_t)0xFF << MCG_C3_SCTRIM_SHIFT)) /*!< Slow Internal Reference Clock Trim Setting (mask) */
#define MCG_C3_SCTRIM(x) ((uint8_t)(((uint8_t)(x) << MCG_C3_SCTRIM_SHIFT) & MCG_C3_SCTRIM_MASK)) /*!< Slow Internal Reference Clock Trim Setting */
/*********** Bits definition for MCG_C4 register **************/
#define MCG_C4_DMX32 ((uint8_t)((uint8_t)1 << 7)) /*!< DCO Maximum Frequency with 32.768 kHz Reference */
#define MCG_C4_DRST_DRS_SHIFT 5 /*!< DCO Range Select (shift) */
#define MCG_C4_DRST_DRS_MASK ((uint8_t)((uint8_t)0x03 << MCG_C4_DRST_DRS_SHIFT)) /*!< DCO Range Select (mask) */
#define MCG_C4_DRST_DRS(x) ((uint8_t)(((uint8_t)(x) << MCG_C4_DRST_DRS_SHIFT) & MCG_C4_DRST_DRS_MASK)) /*!< DCO Range Select */
#define MCG_C4_FCTRIM_SHIFT 1 /*!< Fast Internal Reference Clock Trim Setting (shift) */
#define MCG_C4_FCTRIM_MASK ((uint8_t)((uint8_t)0x0F << MCG_C4_FCTRIM_SHIFT)) /*!< Fast Internal Reference Clock Trim Setting (mask) */
#define MCG_C4_FCTRIM(x) ((uint8_t)(((uint8_t)(x) << MCG_C4_FCTRIM_SHIFT) & MCG_C4_FCTRIM_MASK)) /*!< Fast Internal Reference Clock Trim Setting */
#define MCG_C4_SCFTRIM ((uint8_t)((uint8_t)1 << 0)) /*!< Slow Internal Reference Clock Fine Trim */
/*********** Bits definition for MCG_C5 register **************/
#define MCG_C5_PLLCLKEN0 ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Clock Enable */
#define MCG_C5_PLLSTEN0 ((uint8_t)((uint8_t)1 << 5)) /*!< PLL Stop Enable */
#define MCG_C5_PRDIV0_SHIFT 0 /*!< PLL External Reference Divider (shift) */
#define MCG_C5_PRDIV0_MASK ((uint8_t)((uint8_t)0x1F << MCG_C5_PRDIV0_SHIFT)) /*!< PLL External Reference Divider (mask) */
#define MCG_C5_PRDIV0(x) ((uint8_t)(((uint8_t)(x) << MCG_C5_PRDIV0_SHIFT) & MCG_C5_PRDIV0_MASK)) /*!< PLL External Reference Divider */
/*********** Bits definition for MCG_C6 register **************/
#define MCG_C6_LOLIE0 ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Lock Interrupt Enable */
#define MCG_C6_PLLS ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Select */
#define MCG_C6_CME0 ((uint8_t)((uint8_t)1 << 5)) /*!< Clock Monitor Enable */
#define MCG_C6_VDIV0_SHIFT 0 /*!< VCO 0 Divider (shift) */
#define MCG_C6_VDIV0_MASK ((uint8_t)((uint8_t)0x1F << MCG_C6_VDIV0_SHIFT)) /*!< VCO 0 Divider (mask) */
#define MCG_C6_VDIV0(x) ((uint8_t)(((uint8_t)(x) << MCG_C6_VDIV0_SHIFT) & MCG_C6_VDIV0_MASK)) /*!< VCO 0 Divider */
/************ Bits definition for MCG_S register **************/
#define MCG_S_LOLS ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Lock Status */
#define MCG_S_LOCK0 ((uint8_t)((uint8_t)1 << 6)) /*!< Lock Status */
#define MCG_S_PLLST ((uint8_t)((uint8_t)1 << 5)) /*!< PLL Select Status */
#define MCG_S_IREFST ((uint8_t)((uint8_t)1 << 4)) /*!< Internal Reference Status */
#define MCG_S_CLKST_SHIFT 2 /*!< Clock Mode Status (shift) */
#define MCG_S_CLKST_MASK ((uint8_t)((uint8_t)0x03 << MCG_S_CLKST_SHIFT)) /*!< Clock Mode Status (mask) */
#define MCG_S_CLKST(x) ((uint8_t)(((uint8_t)(x) << MCG_S_CLKST_SHIFT) & MCG_S_CLKST_MASK)) /*!< Clock Mode Status */
#define MCG_S_CLKST_FLL MCG_S_CLKST(0) /*!< Output of the FLL is selected */
#define MCG_S_CLKST_IRCLK MCG_S_CLKST(1) /*!< Internal reference clock is selected */
#define MCG_S_CLKST_ERCLK MCG_S_CLKST(2) /*!< External reference clock is selected */
#define MCG_S_CLKST_PLL MCG_S_CLKST(3) /*!< Output of the PLL is selected */
#define MCG_S_OSCINIT0 ((uint8_t)((uint8_t)1 << 1)) /*!< OSC Initialization */
#define MCG_S_IRCST ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Clock Status */
/************ Bits definition for MCG_SC register **************/
#define MCG_SC_ATME ((uint8_t)((uint8_t)1 << 7)) /*!< Automatic Trim Machine Enable */
#define MCG_SC_ATMS ((uint8_t)((uint8_t)1 << 6)) /*!< Automatic Trim Machine Select */
#define MCG_SC_ATMF ((uint8_t)((uint8_t)1 << 5)) /*!< Automatic Trim Machine Fail Flag */
#define MCG_SC_FLTPRSRV ((uint8_t)((uint8_t)1 << 4) /*!< FLL Filter Preserve Enable */
#define MCG_SC_FCRDIV_SHIFT 1 /*!< Fast Clock Internal Reference Divider (shift) */
#define MCG_SC_FCRDIV_MASK ((uint8_t)((uint8_t)0x07 << MCG_SC_FCRDIV_SHIFT)) /*!< Fast Clock Internal Reference Divider (mask) */
#define MCG_SC_FCRDIV(x) ((uint8_t)(((uint8_t)(x) << MCG_SC_FCRDIV_SHIFT) & MCG_SC_FCRDIV_MASK)) /*!< Fast Clock Internal Reference Divider */
#define MCG_SC_FCRDIV_DIV1 MCG_SC_FCRDIV(0) /*!< Divide Factor is 1 */
#define MCG_SC_FCRDIV_DIV2 MCG_SC_FCRDIV(1) /*!< Divide Factor is 2 */
#define MCG_SC_FCRDIV_DIV4 MCG_SC_FCRDIV(2) /*!< Divide Factor is 4 */
#define MCG_SC_FCRDIV_DIV8 MCG_SC_FCRDIV(3) /*!< Divide Factor is 8 */
#define MCG_SC_FCRDIV_DIV16 MCG_SC_FCRDIV(4) /*!< Divide Factor is 16 */
#define MCG_SC_FCRDIV_DIV32 MCG_SC_FCRDIV(5) /*!< Divide Factor is 32 */
#define MCG_SC_FCRDIV_DIV64 MCG_SC_FCRDIV(6) /*!< Divide Factor is 64 */
#define MCG_SC_FCRDIV_DIV128 MCG_SC_FCRDIV(7) /*!< Divide Factor is 128 */
#define MCG_SC_LOCS0 ((uint8_t)((uint8_t)1 << 0) /*!< OSC0 Loss of Clock Status */
/*********** Bits definition for MCG_ATCVH register ************/
#define MCG_ATCVH_ATCVH_SHIFT 0 /*!< MCG Auto Trim Compare Value High Register (shift) */
#define MCG_ATCVH_ATCVH_MASK ((uint8_t)((uint8_t)0xFF << MCG_ATCVH_ATCVH_SHIFT)) /*!< MCG Auto Trim Compare Value High Register (mask) */
#define MCG_ATCVH_ATCVH(x) ((uint8_t)(((uint8_t)(x) << MCG_ATCVH_ATCVH_SHIFT) & MCG_ATCVH_ATCVH_MASK)) /*!< MCG Auto Trim Compare Value High Register */
/*********** Bits definition for MCG_ATCVL register ************/
#define MCG_ATCVL_ATCVL_SHIFT 0 /*!< MCG Auto Trim Compare Value Low Register (shift) */
#define MCG_ATCVL_ATCVL_MASK ((uint8_t)((uint8_t)0xFF << MCG_ATCVL_ATCVL_SHIFT)) /*!< MCG Auto Trim Compare Value Low Register (mask) */
#define MCG_ATCVL_ATCVL(x) ((uint8_t)(((uint8_t)(x) << MCG_ATCVL_ATCVL_SHIFT) & MCG_ATCVL_ATCVL_MASK)) /*!< MCG Auto Trim Compare Value Low Register */
/************ Bits definition for MCG_C7 register **************/
#define MCG_C7_OSCSEL ((uint8_t)((uint8_t)1 << 0)
/************ Bits definition for MCG_C8 register **************/
#define MCG_C8_LOLRE ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Loss of Lock Reset Enable */
/************ Bits definition for MCG_C9 register **************/
/* All MCG_C9 bits are reserved on the KL26Z. */
/************ Bits definition for MCG_C10 register *************/
/* All MCG_C10 bits are reserved on the KL26Z. */
/****************************************************************/
/* */
/* Serial Peripheral Interface (SPI) */
/* */
/****************************************************************/
/*********** Bits definition for SPIx_S register **************/
#define SPIx_S_SPRF ((uint8_t)0x80) /*!< SPI Read Buffer Full Flag */
#define SPIx_S_SPMF ((uint8_t)0x40) /*!< SPI Match Flag */
#define SPIx_S_SPTEF ((uint8_t)0x20) /*!< SPI Transmit Buffer Empty Flag */
#define SPIx_S_MODF ((uint8_t)0x10) /*!< Master Mode Fault Flag */
#define SPIx_S_RNFULLF ((uint8_t)0x08) /*!< Receive FIFO nearly full flag */
#define SPIx_S_TNEAREF ((uint8_t)0x04) /*!< Transmit FIFO nearly empty flag */
#define SPIx_S_TXFULLF ((uint8_t)0x02) /*!< Transmit FIFO full flag */
#define SPIx_S_RFIFOEF ((uint8_t)0x01) /*!< SPI read FIFO empty flag */
/*********** Bits definition for SPIx_BR register *************/
#define SPIx_BR_SPPR_SHIFT 4 /*!< SPI Baud rate Prescaler Divisor */
#define SPIx_BR_SPPR_MASK ((uint8_t)((uint8_t)0x7 << SPIx_BR_SPPR_SHIFT))
#define SPIx_BR_SPPR(x) ((uint8_t)(((uint8_t)(x) << SPIx_BR_SPPR_SHIFT) & SPIx_BR_SPPR_MASK))
#define SPIx_BR_SPR_SHIFT 0 /*!< SPI Baud rate Divisor */
#define SPIx_BR_SPR_MASK ((uint8_t)((uint8_t)0x0F << SPIx_BR_SPR_SHIFT))
#define SPIx_BR_SPR(x) ((uint8_t)(((uint8_t)(x) << SPIx_BR_SPR_SHIFT) & SPIx_BR_SPR_MASK))
/*********** Bits definition for SPIx_C2 register *************/
#define SPIx_C2_SPMIE ((uint8_t)0x80) /*!< SPI Match Interrupt Enable */
#define SPIx_C2_SPIMODE ((uint8_t)0x40) /*!< SPI 8-bit or 16-bit mode */
#define SPIx_C2_TXDMAE ((uint8_t)0x20) /*!< Transmit DMA Enable */
#define SPIx_C2_MODFEN ((uint8_t)0x10) /*!< Master Mode-Fault Function Enable */
#define SPIx_C2_BIDIROE ((uint8_t)0x08) /*!< Bidirectional Mode Output Enable */
#define SPIx_C2_RXDMAE ((uint8_t)0x04) /*!< Receive DMA Enable */
#define SPIx_C2_SPISWAI ((uint8_t)0x02) /*!< SPI Stop in Wait Mode */
#define SPIx_C2_SPC0 ((uint8_t)0x01) /*!< SPI Pin Control 0 */
/*********** Bits definition for SPIx_C1 register *************/
#define SPIx_C1_SPIE ((uint8_t)0x80) /*!< SPI Interrupt Enable */
#define SPIx_C1_SPE ((uint8_t)0x40) /*!< SPI System Enable */
#define SPIx_C1_SPTIE ((uint8_t)0x20) /*!< SPI Transmit Interrupt Enable */
#define SPIx_C1_MSTR ((uint8_t)0x10) /*!< Master/Slave Mode Select */
#define SPIx_C1_CPOL ((uint8_t)0x08) /*!< Clock Polarity */
#define SPIx_C1_CPHA ((uint8_t)0x04) /*!< Clock Phase */
#define SPIx_C1_SSOE ((uint8_t)0x02) /*!< Slave Select Output Enable */
#define SPIx_C1_LSBFE ((uint8_t)0x01) /*!< LSB First */
/*********** Bits definition for SPIx_ML register *************/
#define SPIx_ML_DATA_SHIFT 0 /*!< SPI HW Compare value for Match - low byte */
#define SPIx_ML_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_ML_DATA_SHIFT))
#define SPIx_ML_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_ML_DATA_SHIFT) & SPIx_ML_DATA_MASK))
/*********** Bits definition for SPIx_MH register *************/
#define SPIx_MH_DATA_SHIFT 0 /*!< SPI HW Compare value for Match - high byte */
#define SPIx_MH_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_MH_DATA_SHIFT))
#define SPIx_MH_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_MH_DATA_SHIFT) & SPIx_MH_DATA_MASK))
/*********** Bits definition for SPIx_DL register *************/
#define SPIx_DL_DATA_SHIFT 0 /*!< Data - low byte */
#define SPIx_DL_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_DL_DATA_SHIFT))
#define SPIx_DL_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_DL_DATA_SHIFT) & SPIx_DL_DATA_MASK))
/*********** Bits definition for SPIx_DH register *************/
#define SPIx_DH_DATA_SHIFT 0 /*!< Data - high byte */
#define SPIx_DH_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_DH_DATA_SHIFT))
#define SPIx_DH_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_DH_DATA_SHIFT) & SPIx_DH_DATA_MASK))
/*********** Bits definition for SPIx_CI register *************/
#define SPIx_CI_TXFERR ((uint8_t)0x80) /*!< Transmit FIFO error flag */
#define SPIx_CI_RXFERR ((uint8_t)0x40) /*!< Receive FIFO error flag */
#define SPIx_CI_TXFOF ((uint8_t)0x20) /*!< Transmit FIFO overflow flag */
#define SPIx_CI_RXFOF ((uint8_t)0x10) /*!< Receive FIFO overflow flag */
#define SPIx_CI_TNEAREFCI ((uint8_t)0x08) /*!< Transmit FIFO nearly empty flag clear interrupt */
#define SPIx_CI_RNFULLFCI ((uint8_t)0x04) /*!< Receive FIFO nearly full flag clear interrupt */
#define SPIx_CI_SPTEFCI ((uint8_t)0x02) /*!< Transmit FIFO empty flag clear interrupt */
#define SPIx_CI_SPRFCI ((uint8_t)0x01) /*!< Receive FIFO full flag clear interrupt */
/*********** Bits definition for SPIx_C3 register *************/
#define SPIx_C3_TNEAREF_MARK ((uint8_t)0x20) /*!< Transmit FIFO nearly empty watermark */
#define SPIx_C3_RNFULLF_MARK ((uint8_t)0x10) /*!< Receive FIFO nearly full watermark */
#define SPIx_C3_INTCLR ((uint8_t)0x08) /*!< Interrupt clearing mechanism select */
#define SPIx_C3_TNEARIEN ((uint8_t)0x04) /*!< Transmit FIFO nearly empty interrupt enable */
#define SPIx_C3_RNFULLIEN ((uint8_t)0x02) /*!< Receive FIFO nearly full interrupt enable */
#define SPIx_C3_FIFOMODE ((uint8_t)0x01) /*!< FIFO mode enable */
/****************************************************************/
/* */
/* Inter-Integrated Circuit (I2C): Device dependent part */
/* */
/****************************************************************/
/*********** Bits definition for I2Cx_FLT register ************/
#define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */
#define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */
#define I2Cx_FLT_STOPIE ((uint8_t)0x20) /*!< I2C Bus Stop Interrupt Enable */
#define I2Cx_FLT_FLT_SHIFT 0 /*!< I2C Programmable Filter Factor */
#define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x1F << I2Cx_FLT_FLT_SHIFT))
#define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK))
/****************************************************************/
/* */
/* Universal Asynchronous Receiver/Transmitter (UART) */
/* */
/****************************************************************/
/********* Bits definition for UARTx_BDH register *************/
#define UARTx_BDH_LBKDIE ((uint8_t)0x80) /*!< LIN Break Detect Interrupt Enable */
#define UARTx_BDH_RXEDGIE ((uint8_t)0x40) /*!< RX Input Active Edge Interrupt Enable */
#define UARTx_BDH_SBNS ((uint8_t)0x20) /*!< Stop Bit Number Select */
#define UARTx_BDH_SBR_SHIFT 0 /*!< Baud Rate Modulo Divisor */
#define UARTx_BDH_SBR_MASK ((uint8_t)((uint8_t)0x1F << UARTx_BDH_SBR_SHIFT))
#define UARTx_BDH_SBR(x) ((uint8_t)(((uint8_t)(x) << UARTx_BDH_SBR_SHIFT) & UARTx_BDH_SBR_MASK))
/********* Bits definition for UARTx_BDL register *************/
#define UARTx_BDL_SBR_SHIFT 0 /*!< Baud Rate Modulo Divisor */
#define UARTx_BDL_SBR_MASK ((uint8_t)((uint8_t)0xFF << UARTx_BDL_SBR_SHIFT))
#define UARTx_BDL_SBR(x) ((uint8_t)(((uint8_t)(x) << UARTx_BDL_SBR_SHIFT) & UARTx_BDL_SBR_MASK))
/********* Bits definition for UARTx_C1 register **************/
#define UARTx_C1_LOOPS ((uint8_t)0x80) /*!< Loop Mode Select */
#define UARTx_C1_DOZEEN ((uint8_t)0x40) /*!< Doze Enable */
#define UARTx_C1_UARTSWAI ((uint8_t)0x40) /*!< UART Stops in Wait Mode */
#define UARTx_C1_RSRC ((uint8_t)0x20) /*!< Receiver Source Select */
#define UARTx_C1_M ((uint8_t)0x10) /*!< 9-Bit or 8-Bit Mode Select */
#define UARTx_C1_WAKE ((uint8_t)0x08) /*!< Receiver Wakeup Method Select */
#define UARTx_C1_ILT ((uint8_t)0x04) /*!< Idle Line Type Select */
#define UARTx_C1_PE ((uint8_t)0x02) /*!< Parity Enable */
#define UARTx_C1_PT ((uint8_t)0x01) /*!< Parity Type */
/********* Bits definition for UARTx_C2 register **************/
#define UARTx_C2_TIE ((uint8_t)0x80) /*!< Transmit Interrupt Enable for TDRE */
#define UARTx_C2_TCIE ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable for TC */
#define UARTx_C2_RIE ((uint8_t)0x20) /*!< Receiver Interrupt Enable for RDRF */
#define UARTx_C2_ILIE ((uint8_t)0x10) /*!< Idle Line Interrupt Enable for IDLE */
#define UARTx_C2_TE ((uint8_t)0x08) /*!< Transmitter Enable */
#define UARTx_C2_RE ((uint8_t)0x04) /*!< Receiver Enable */
#define UARTx_C2_RWU ((uint8_t)0x02) /*!< Receiver Wakeup Control */
#define UARTx_C2_SBK ((uint8_t)0x01) /*!< Send Break */
/********* Bits definition for UARTx_S1 register **************/
#define UARTx_S1_TDRE ((uint8_t)0x80) /*!< Transmit Data Register Empty Flag */
#define UARTx_S1_TC ((uint8_t)0x40) /*!< Transmission Complete Flag */
#define UARTx_S1_RDRF ((uint8_t)0x20) /*!< Receiver Data Register Full Flag */
#define UARTx_S1_IDLE ((uint8_t)0x10) /*!< Idle Line Flag */
#define UARTx_S1_OR ((uint8_t)0x08) /*!< Receiver Overrun Flag */
#define UARTx_S1_NF ((uint8_t)0x04) /*!< Noise Flag */
#define UARTx_S1_FE ((uint8_t)0x02) /*!< Framing Error Flag */
#define UARTx_S1_PF ((uint8_t)0x01) /*!< Parity Error Flag */
/********* Bits definition for UARTx_S2 register **************/
#define UARTx_S2_LBKDIF ((uint8_t)0x80) /*!< LIN Break Detect Interrupt Flag */
#define UARTx_S2_RXEDGIF ((uint8_t)0x40) /*!< UART_RX Pin Active Edge Interrupt Flag */
#define UARTx_S2_MSBF ((uint8_t)0x20) /*!< MSB First */
#define UARTx_S2_RXINV ((uint8_t)0x10) /*!< Receive Data Inversion */
#define UARTx_S2_RWUID ((uint8_t)0x08) /*!< Receive Wake Up Idle Detect */
#define UARTx_S2_BRK13 ((uint8_t)0x04) /*!< Break Character Generation Length */
#define UARTx_S2_LBKDE ((uint8_t)0x02) /*!< LIN Break Detect Enable */
#define UARTx_S2_RAF ((uint8_t)0x01) /*!< Receiver Active Flag */
/********* Bits definition for UARTx_C3 register **************/
#define UARTx_C3_R8T9 ((uint8_t)0x80) /*!< Receive Bit 8 / Transmit Bit 9 */
#define UARTx_C3_R8 ((uint8_t)0x80) /*!< Ninth Data Bit for Receiver */
#define UARTx_C3_R9T8 ((uint8_t)0x40) /*!< Receive Bit 9 / Transmit Bit 8 */
#define UARTx_C3_T8 ((uint8_t)0x40) /*!< Ninth Data Bit for Transmitter */
#define UARTx_C3_TXDIR ((uint8_t)0x20) /*!< UART_TX Pin Direction in Single-Wire Mode */
#define UARTx_C3_TXINV ((uint8_t)0x10) /*!< Transmit Data Inversion */
#define UARTx_C3_ORIE ((uint8_t)0x08) /*!< Overrun Interrupt Enable */
#define UARTx_C3_NEIE ((uint8_t)0x04) /*!< Noise Error Interrupt Enable */
#define UARTx_C3_FEIE ((uint8_t)0x02) /*!< Framing Error Interrupt Enable */
#define UARTx_C3_PEIE ((uint8_t)0x01) /*!< Parity Error Interrupt Enable */
/********* Bits definition for UARTx_D register ***************/
#define UARTx_D_R7T7 ((uint8_t)0x80) /*!< Read receive data buffer 7 or write transmit data buffer 7 */
#define UARTx_D_R6T6 ((uint8_t)0x40) /*!< Read receive data buffer 6 or write transmit data buffer 6 */
#define UARTx_D_R5T5 ((uint8_t)0x20) /*!< Read receive data buffer 5 or write transmit data buffer 5 */
#define UARTx_D_R4T4 ((uint8_t)0x10) /*!< Read receive data buffer 4 or write transmit data buffer 4 */
#define UARTx_D_R3T3 ((uint8_t)0x08) /*!< Read receive data buffer 3 or write transmit data buffer 3 */
#define UARTx_D_R2T2 ((uint8_t)0x04) /*!< Read receive data buffer 2 or write transmit data buffer 2 */
#define UARTx_D_R1T1 ((uint8_t)0x02) /*!< Read receive data buffer 1 or write transmit data buffer 1 */
#define UARTx_D_R0T0 ((uint8_t)0x01) /*!< Read receive data buffer 0 or write transmit data buffer 0 */
#define UARTx_D_RT_SHIFT 0
#define UARTx_D_RT_MASK ((uint8_t)0xFF)
/********* Bits definition for UARTx_MA1 register *************/
#define UARTx_MA1_MA_SHIFT 0 /*!< Match Address */
#define UARTx_MA1_MA_MASK ((uint8_t)((uint8_t)0xFF << UARTx_MA1_MA_SHIFT))
#define UARTx_MA1_MA(x) ((uint8_t)(((uint8_t)(x) << UARTx_MA1_MA_SHIFT) & UARTx_MA1_MA_MASK))
/********* Bits definition for UARTx_MA2 register *************/
#define UARTx_MA2_MA_SHIFT 0 /*!< Match Address */
#define UARTx_MA2_MA_MASK ((uint8_t)((uint8_t)0xFF << UARTx_MA2_MA_SHIFT))
#define UARTx_MA2_MA(x) ((uint8_t)(((uint8_t)(x) << UARTx_MA2_MA_SHIFT) & UARTx_MA2_MA_MASK))
/********* Bits definition for UARTx_C4 register **************/
#define UARTx_C4_TDMAS ((uint8_t)0x80) /*!< Transmitter DMA Select */
#define UARTx_C4_RDMAS ((uint8_t)0x20) /*!< Receiver Full DMA Select */
#define UARTx_C4_MAEN1 ((uint8_t)0x80) /*!< Match Address Mode Enable 1 */
#define UARTx_C4_MAEN2 ((uint8_t)0x40) /*!< Match Address Mode Enable 2 */
#define UARTx_C4_M10 ((uint8_t)0x20) /*!< 10-bit Mode Select */
#define UARTx_C4_OSR_SHIFT 0 /*!< Over Sampling Ratio */
#define UARTx_C4_OSR_MASK ((uint8_t)((uint8_t)0x1F << UARTx_C4_OSR_SHIFT))
#define UARTx_C4_OSR(x) ((uint8_t)(((uint8_t)(x) << UARTx_C4_OSR_SHIFT) & UARTx_C4_OSR_MASK))
/********* Bits definition for UARTx_C5 register **************/
#define UARTx_C5_TDMAE ((uint8_t)0x80) /*!< Transmitter DMA Enable */
#define UARTx_C5_RDMAE ((uint8_t)0x20) /*!< Receiver Full DMA Enable */
#define UARTx_C5_BOTHEDGE ((uint8_t)0x02) /*!< Both Edge Sampling */
#define UARTx_C5_RESYNCDIS ((uint8_t)0x01) /*!< Resynchronization Disable */
/****************************************************************/
/* */
/* Power Management Controller (PMC) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Timer/PWM Module (TPM) */
/* */
/****************************************************************/
/********** Bits definition for TPMx_SC register ***************/
#define TPMx_SC_DMA ((uint32_t)0x100) /*!< DMA Enable */
#define TPMx_SC_TOF ((uint32_t)0x80) /*!< Timer Overflow Flag */
#define TPMx_SC_TOIE ((uint32_t)0x40) /*!< Timer Overflow Interrupt Enable */
#define TPMx_SC_CPWMS ((uint32_t)0x20) /*!< Center-aligned PWM Select */
#define TPMx_SC_CMOD_SHIFT 3 /*!< Clock Mode Selection */
#define TPMx_SC_CMOD_MASK ((uint32_t)((uint32_t)0x3 << TPMx_SC_CMOD_SHIFT))
#define TPMx_SC_CMOD(x) ((uint32_t)(((uint32_t)(x) << TPMx_SC_CMOD_SHIFT) & TPMx_SC_CMOD_MASK))
#define TPMx_SC_PS_SHIFT 0 /*!< Prescale Factor Selection */
#define TPMx_SC_PS_MASK ((uint32_t)((uint32_t)0x7 << TPMx_SC_PS_SHIFT))
#define TPMx_SC_PS(x) ((uint32_t)(((uint32_t)(x) << TPMx_SC_PS_SHIFT) & TPMx_SC_PS_MASK))
#define TPMx_SC_CMOD_DISABLE TPMx_SC_CMOD(0)
#define TPMx_SC_CMOD_LPTPM_CLK TPMx_SC_CMOD(1)
#define TPMx_SC_CMOD_LPTPM_EXTCLK TPMx_SC_CMOD(2)
/********** Bits definition for TPMx_CNT register **************/
#define TPMx_CNT_COUNT_SHIFT 0 /*!< Counter Value */
#define TPMx_CNT_COUNT_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_CNT_COUNT_SHIFT))
#define TPMx_CNT_COUNT(x) ((uint32_t)(((uint32_t)(x) << TPMx_CNT_COUNT_SHIFT) & TPMx_CNT_COUNT_MASK))
/********** Bits definition for TPMx_MOD register **************/
#define TPMx_MOD_MOD_SHIFT 0 /*!< Modulo Value */
#define TPMx_MOD_MOD_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_MOD_MOD_SHIFT))
#define TPMx_MOD_MOD(x) ((uint32_t)(((uint32_t)(x) << TPMx_MOD_MOD_SHIFT) & TPMx_MOD_MOD_MASK))
/********** Bits definition for TPMx_CnSC register *************/
#define TPMx_CnSC_CHF ((uint32_t)0x80) /*!< Channel Flag */
#define TPMx_CnSC_CHIE ((uint32_t)0x40) /*!< Channel Interrupt Enable */
#define TPMx_CnSC_MSB ((uint32_t)0x20) /*!< Channel Mode Select */
#define TPMx_CnSC_MSA ((uint32_t)0x10) /*!< Channel Mode Select */
#define TPMx_CnSC_ELSB ((uint32_t)0x8) /*!< Edge or Level Select */
#define TPMx_CnSC_ELSA ((uint32_t)0x4) /*!< Edge or Level Select */
#define TPMx_CnSC_DMA ((uint32_t)0x1) /*!< DMA Enable */
/********** Bits definition for TPMx_CnV register **************/
#define TPMx_CnV_VAL_SHIFT 0 /*!< Channel Value */
#define TPMx_CnV_VAL_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_CnV_VAL_SHIFT))
#define TPMx_CnV_VAL(x) ((uint32_t)(((uint32_t)(x) << TPMx_CnV_VAL_SHIFT) & TPMx_CnV_VAL_MASK))
/********* Bits definition for TPMx_STATUS register ************/
#define TPMx_STATUS_TOF ((uint32_t)0x100) /*!< Timer Overflow Flag */
#define TPMx_STATUS_CH5F ((uint32_t)0x20) /*!< Channel 5 Flag */
#define TPMx_STATUS_CH4F ((uint32_t)0x10) /*!< Channel 4 Flag */
#define TPMx_STATUS_CH3F ((uint32_t)0x8) /*!< Channel 3 Flag */
#define TPMx_STATUS_CH2F ((uint32_t)0x4) /*!< Channel 2 Flag */
#define TPMx_STATUS_CH1F ((uint32_t)0x2) /*!< Channel 1 Flag */
#define TPMx_STATUS_CH0F ((uint32_t)0x1) /*!< Channel 0 Flag */
/********** Bits definition for TPMx_CONF register *************/
#define TPMx_CONF_TRGSEL_SHIFT 24 /*!< Trigger Select */
#define TPMx_CONF_TRGSEL_MASK ((uint32_t)((uint32_t)0xF << TPMx_CONF_TRGSEL_SHIFT))
#define TPMx_CONF_TRGSEL(x) ((uint32_t)(((uint32_t)(x) << TPMx_CONF_TRGSEL_SHIFT) & TPMx_CONF_TRGSEL_MASK))
#define TPMx_CONF_CROT ((uint32_t)0x40000) /*!< Counter Reload On Trigger */
#define TPMx_CONF_CSOO ((uint32_t)0x20000) /*!< Counter Stop On Overflow */
#define TPMx_CONF_CSOT ((uint32_t)0x10000) /*!< Counter Start on Trigger */
#define TPMx_CONF_GTBEEN ((uint32_t)0x200) /*!< Global time base enable */
#define TPMx_CONF_DBGMODE_SHIFT 6 /*!< Debug Mode */
#define TPMx_CONF_DBGMODE_MASK ((uint32_t)((uint32_t)0x3 << TPMx_CONF_DBGMODE_SHIFT))
#define TPMx_CONF_DBGMODE(x) ((uint32_t)(((uint32_t)(x) << TPMx_CONF_DBGMODE_SHIFT) & TPMx_CONF_DBGMODE_MASK))
#define TPMx_CONF_DOZEEN ((uint32_t)0x20) /*!< Doze Enable */
/****************************************************************/
/* */
/* USB OTG: device dependent parts */
/* */
/****************************************************************/
/******** Bits definition for USBx_ADDINFO register ***********/
#define USBx_ADDINFO_IRQNUM_SHIFT 6 /*!< Assigned Interrupt Request Number */
#define USBx_ADDINFO_IRQNUM_MASK ((uint8_t)((uint8_t)0x1F << USBx_ADDINFO_IRQNUM_SHIFT))
/******** Bits definition for USBx_OTGISTAT register **********/
#define USBx_OTGISTAT_IDCHG ((uint8_t)0x80) /*!< Change in the ID Signal from the USB connector is sensed. */
#define USBx_OTGISTAT_ONEMSEC ((uint8_t)0x40) /*!< Set when the 1 millisecond timer expires. */
#define USBx_OTGISTAT_LINE_STATE_CHG ((uint8_t)0x20) /*!< Set when the USB line state changes. */
#define USBx_OTGISTAT_SESSVLDCHG ((uint8_t)0x08) /*!< Set when a change in VBUS is detected indicating a session valid or a session no longer valid. */
#define USBx_OTGISTAT_B_SESS_CHG ((uint8_t)0x04) /*!< Set when a change in VBUS is detected on a B device. */
#define USBx_OTGISTAT_AVBUSCHG ((uint8_t)0x01) /*!< Set when a change in VBUS is detected on an A device. */
/******** Bits definition for USBx_OTGICR register ************/
#define USBx_OTGICR_IDEN ((uint8_t)0x80) /*!< ID Interrupt Enable */
#define USBx_OTGICR_ONEMSECEN ((uint8_t)0x40) /*!< One Millisecond Interrupt Enable */
#define USBx_OTGICR_LINESTATEEN ((uint8_t)0x20) /*!< Line State Change Interrupt Enable */
#define USBx_OTGICR_SESSVLDEN ((uint8_t)0x08) /*!< Session Valid Interrupt Enable */
#define USBx_OTGICR_BSESSEN ((uint8_t)0x04) /*!< B Session END Interrupt Enable */
#define USBx_OTGICR_AVBUSEN ((uint8_t)0x01) /*!< A VBUS Valid Interrupt Enable */
/******** Bits definition for USBx_OTGSTAT register ***********/
#define USBx_OTGSTAT_ID ((uint8_t)0x80) /*!< Indicates the current state of the ID pin on the USB connector */
#define USBx_OTGSTAT_ONEMSECEN ((uint8_t)0x40) /*!< This bit is reserved for the 1ms count, but it is not useful to software. */
#define USBx_OTGSTAT_LINESTATESTABLE ((uint8_t)0x20) /*!< Indicates that the internal signals that control the LINE_STATE_CHG field of OTGISTAT are stable for at least 1 millisecond. */
#define USBx_OTGSTAT_SESS_VLD ((uint8_t)0x08) /*!< Session Valid */
#define USBx_OTGSTAT_BSESSEND ((uint8_t)0x04) /*!< B Session End */
#define USBx_OTGSTAT_AVBUSVLD ((uint8_t)0x01) /*!< A VBUS Valid */
/******** Bits definition for USBx_OTGCTL register ************/
#define USBx_OTGCTL_DPLOW ((uint8_t)0x20) /*!< D+ Data Line pull-down resistor enable */
#define USBx_OTGCTL_DMLOW ((uint8_t)0x10) /*!< D Data Line pull-down resistor enable */
#define USBx_OTGCTL_OTGEN ((uint8_t)0x04) /*!< On-The-Go pullup/pulldown resistor enable */
/******** Bits definition for USBx_ISTAT register *************/
#define USBx_ISTAT_ATTACH ((uint8_t)0x40) /*!< Attach interrupt */
/******** Bits definition for USBx_INTEN register ***************/
#define USBx_INTEN_ATTACHEN ((uint8_t)0x40) /*!< ATTACH interrupt enable */
/******** Bits definition for USBx_CTL register *****************/
#define USBx_CTL_RESET ((uint8_t)0x10) /*!< Generates an USB reset signal (host mode) */
#define USBx_CTL_HOSTMODEEN ((uint8_t)0x08) /*!< Operate in Host mode */
#define USBx_CTL_RESUME ((uint8_t)0x04) /*!< Executes resume signaling */
/******** Bits definition for USBx_ADDR register ****************/
#define USBx_ADDR_LSEN ((uint8_t)0x80) /*!< Low Speed Enable bit */
/******** Bits definition for USBx_TOKEN register ***************/
#define USBx_TOKEN_TOKENPID_SHIFT 4 /*!< Contains the token type executed by the USB module. */
#define USBx_TOKEN_TOKENPID_MASK ((uint8_t)((uint8_t)0x0F << USBx_TOKEN_TOKENPID_SHIFT))
#define USBx_TOKEN_TOKENPID(x) ((uint8_t)(((uint8_t)(x) << USBx_TOKEN_TOKENPID_SHIFT) & USBx_TOKEN_TOKENPID_MASK))
#define USBx_TOKEN_TOKENENDPT_SHIFT 0 /*!< Holds the Endpoint address for the token command. */
#define USBx_TOKEN_TOKENENDPT_MASK ((uint8_t)((uint8_t)0x0F << USBx_TOKEN_TOKENENDPT_SHIFT))
#define USBx_TOKEN_TOKENENDPT(x) ((uint8_t)(((uint8_t)(x) << USBx_TOKEN_TOKENENDPT_SHIFT) & USBx_TOKEN_TOKENENDPT_MASK))
#define USBx_TOKEN_TOKENPID_OUT 0x1
#define USBx_TOKEN_TOKENPID_IN 0x9
#define USBx_TOKEN_TOKENPID_SETUP 0xD
/******** Bits definition for USBx_ENDPTn register **************/
#define USBx_ENDPTn_HOSTWOHUB ((uint8_t)0x80)
#define USBx_ENDPTn_RETRYDIS ((uint8_t)0x40)
/****************************************************************/
/* */
/* Reset Control Module (RCM) */
/* */
/****************************************************************/
/* Only device independent parts */
/****************************************************************/
/* */
/* System Mode Controller (SMC) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Digital-to-Analog Converter (DAC) */
/* */
/****************************************************************/
/* Mostly Device independent */
#define DACx_C1_DACBFMD_SHIFT 2 /*!< DAC Buffer Work Mode Select */
#define DACx_C1_DACBFMD_MASK ((uint8_t)((uint8_t)0x01 << DACx_C1_DACBFMD_ SHIFT))
#define DACx_C1_DACBFMD(x) ((uint8_t)(((uint8_t)(x) << DACx_C1_DACBFMD_SHIFT) & DACx_C1_DACBFMD_MASK))
#define DACx_C1_DACBFMD_MODE_NORMAL 0
#define DACx_C1_DACBFMD_MODE_OTS 1
/****************************************************************/
/* */
/* Real Time Clock (RTC) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Comparator (CMP) */
/* */
/****************************************************************/
/* Device independent */
/****************************************************************/
/* */
/* Flash Memory Module (FTFA) */
/* */
/****************************************************************/
/* Device independent */
#endif /* _KL26Z_H_ */