471 lines
25 KiB
C
471 lines
25 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_i2c.h - Macros used when accessing the I2C master and slave hardware.
|
|
//
|
|
// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_I2C_H__
|
|
#define __HW_I2C_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the I2C register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_O_MSA 0x00000000 // I2C Master Slave Address
|
|
#define I2C_O_MCS 0x00000004 // I2C Master Control/Status
|
|
#define I2C_O_MDR 0x00000008 // I2C Master Data
|
|
#define I2C_O_MTPR 0x0000000C // I2C Master Timer Period
|
|
#define I2C_O_MIMR 0x00000010 // I2C Master Interrupt Mask
|
|
#define I2C_O_MRIS 0x00000014 // I2C Master Raw Interrupt Status
|
|
#define I2C_O_MMIS 0x00000018 // I2C Master Masked Interrupt
|
|
// Status
|
|
#define I2C_O_MICR 0x0000001C // I2C Master Interrupt Clear
|
|
#define I2C_O_MCR 0x00000020 // I2C Master Configuration
|
|
#define I2C_O_MCLKOCNT 0x00000024 // I2C Master Clock Low Timeout
|
|
// Count
|
|
#define I2C_O_MBMON 0x0000002C // I2C Master Bus Monitor
|
|
#define I2C_O_MBLEN 0x00000030 // I2C Master Burst Length
|
|
#define I2C_O_MBCNT 0x00000034 // I2C Master Burst Count
|
|
#define I2C_O_MCR2 0x00000038 // I2C Master Configuration 2
|
|
#define I2C_O_SOAR 0x00000800 // I2C Slave Own Address
|
|
#define I2C_O_SCSR 0x00000804 // I2C Slave Control/Status
|
|
#define I2C_O_SDR 0x00000808 // I2C Slave Data
|
|
#define I2C_O_SIMR 0x0000080C // I2C Slave Interrupt Mask
|
|
#define I2C_O_SRIS 0x00000810 // I2C Slave Raw Interrupt Status
|
|
#define I2C_O_SMIS 0x00000814 // I2C Slave Masked Interrupt
|
|
// Status
|
|
#define I2C_O_SICR 0x00000818 // I2C Slave Interrupt Clear
|
|
#define I2C_O_SOAR2 0x0000081C // I2C Slave Own Address 2
|
|
#define I2C_O_SACKCTL 0x00000820 // I2C Slave ACK Control
|
|
#define I2C_O_FIFODATA 0x00000F00 // I2C FIFO Data
|
|
#define I2C_O_FIFOCTL 0x00000F04 // I2C FIFO Control
|
|
#define I2C_O_FIFOSTATUS 0x00000F08 // I2C FIFO Status
|
|
#define I2C_O_PP 0x00000FC0 // I2C Peripheral Properties
|
|
#define I2C_O_PC 0x00000FC4 // I2C Peripheral Configuration
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MSA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address
|
|
#define I2C_MSA_RS 0x00000001 // Receive not send
|
|
#define I2C_MSA_SA_S 1
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MCS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MCS_ACTDMARX 0x80000000 // DMA RX Active Status
|
|
#define I2C_MCS_ACTDMATX 0x40000000 // DMA TX Active Status
|
|
#define I2C_MCS_CLKTO 0x00000080 // Clock Timeout Error
|
|
#define I2C_MCS_BURST 0x00000040 // Burst Enable
|
|
#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy
|
|
#define I2C_MCS_IDLE 0x00000020 // I2C Idle
|
|
#define I2C_MCS_QCMD 0x00000020 // Quick Command
|
|
#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost
|
|
#define I2C_MCS_HS 0x00000010 // High-Speed Enable
|
|
#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable
|
|
#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data
|
|
#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address
|
|
#define I2C_MCS_STOP 0x00000004 // Generate STOP
|
|
#define I2C_MCS_ERROR 0x00000002 // Error
|
|
#define I2C_MCS_START 0x00000002 // Generate START
|
|
#define I2C_MCS_RUN 0x00000001 // I2C Master Enable
|
|
#define I2C_MCS_BUSY 0x00000001 // I2C Busy
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MDR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MDR_DATA_M 0x000000FF // This byte contains the data
|
|
// transferred during a transaction
|
|
#define I2C_MDR_DATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MTPR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MTPR_PULSEL_M 0x00070000 // Glitch Suppression Pulse Width
|
|
#define I2C_MTPR_PULSEL_BYPASS 0x00000000 // Bypass
|
|
#define I2C_MTPR_PULSEL_1 0x00010000 // 1 clock
|
|
#define I2C_MTPR_PULSEL_2 0x00020000 // 2 clocks
|
|
#define I2C_MTPR_PULSEL_3 0x00030000 // 3 clocks
|
|
#define I2C_MTPR_PULSEL_4 0x00040000 // 4 clocks
|
|
#define I2C_MTPR_PULSEL_8 0x00050000 // 8 clocks
|
|
#define I2C_MTPR_PULSEL_16 0x00060000 // 16 clocks
|
|
#define I2C_MTPR_PULSEL_31 0x00070000 // 31 clocks
|
|
#define I2C_MTPR_HS 0x00000080 // High-Speed Enable
|
|
#define I2C_MTPR_TPR_M 0x0000007F // Timer Period
|
|
#define I2C_MTPR_TPR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MIMR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MIMR_RXFFIM 0x00000800 // Receive FIFO Full Interrupt Mask
|
|
#define I2C_MIMR_TXFEIM 0x00000400 // Transmit FIFO Empty Interrupt
|
|
// Mask
|
|
#define I2C_MIMR_RXIM 0x00000200 // Receive FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_MIMR_TXIM 0x00000100 // Transmit FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_MIMR_ARBLOSTIM 0x00000080 // Arbitration Lost Interrupt Mask
|
|
#define I2C_MIMR_STOPIM 0x00000040 // STOP Detection Interrupt Mask
|
|
#define I2C_MIMR_STARTIM 0x00000020 // START Detection Interrupt Mask
|
|
#define I2C_MIMR_NACKIM 0x00000010 // Address/Data NACK Interrupt Mask
|
|
#define I2C_MIMR_DMATXIM 0x00000008 // Transmit DMA Interrupt Mask
|
|
#define I2C_MIMR_DMARXIM 0x00000004 // Receive DMA Interrupt Mask
|
|
#define I2C_MIMR_CLKIM 0x00000002 // Clock Timeout Interrupt Mask
|
|
#define I2C_MIMR_IM 0x00000001 // Master Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MRIS_RXFFRIS 0x00000800 // Receive FIFO Full Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_TXFERIS 0x00000400 // Transmit FIFO Empty Raw
|
|
// Interrupt Status
|
|
#define I2C_MRIS_RXRIS 0x00000200 // Receive FIFO Request Raw
|
|
// Interrupt Status
|
|
#define I2C_MRIS_TXRIS 0x00000100 // Transmit Request Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_ARBLOSTRIS 0x00000080 // Arbitration Lost Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_STOPRIS 0x00000040 // STOP Detection Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_STARTRIS 0x00000020 // START Detection Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_NACKRIS 0x00000010 // Address/Data NACK Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_DMATXRIS 0x00000008 // Transmit DMA Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_DMARXRIS 0x00000004 // Receive DMA Raw Interrupt Status
|
|
#define I2C_MRIS_CLKRIS 0x00000002 // Clock Timeout Raw Interrupt
|
|
// Status
|
|
#define I2C_MRIS_RIS 0x00000001 // Master Raw Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MMIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MMIS_RXFFMIS 0x00000800 // Receive FIFO Full Interrupt Mask
|
|
#define I2C_MMIS_TXFEMIS 0x00000400 // Transmit FIFO Empty Interrupt
|
|
// Mask
|
|
#define I2C_MMIS_RXMIS 0x00000200 // Receive FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_MMIS_TXMIS 0x00000100 // Transmit Request Interrupt Mask
|
|
#define I2C_MMIS_ARBLOSTMIS 0x00000080 // Arbitration Lost Interrupt Mask
|
|
#define I2C_MMIS_STOPMIS 0x00000040 // STOP Detection Interrupt Mask
|
|
#define I2C_MMIS_STARTMIS 0x00000020 // START Detection Interrupt Mask
|
|
#define I2C_MMIS_NACKMIS 0x00000010 // Address/Data NACK Interrupt Mask
|
|
#define I2C_MMIS_DMATXMIS 0x00000008 // Transmit DMA Interrupt Status
|
|
#define I2C_MMIS_DMARXMIS 0x00000004 // Receive DMA Interrupt Status
|
|
#define I2C_MMIS_CLKMIS 0x00000002 // Clock Timeout Masked Interrupt
|
|
// Status
|
|
#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MICR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MICR_RXFFIC 0x00000800 // Receive FIFO Full Interrupt
|
|
// Clear
|
|
#define I2C_MICR_TXFEIC 0x00000400 // Transmit FIFO Empty Interrupt
|
|
// Clear
|
|
#define I2C_MICR_RXIC 0x00000200 // Receive FIFO Request Interrupt
|
|
// Clear
|
|
#define I2C_MICR_TXIC 0x00000100 // Transmit FIFO Request Interrupt
|
|
// Clear
|
|
#define I2C_MICR_ARBLOSTIC 0x00000080 // Arbitration Lost Interrupt Clear
|
|
#define I2C_MICR_STOPIC 0x00000040 // STOP Detection Interrupt Clear
|
|
#define I2C_MICR_STARTIC 0x00000020 // START Detection Interrupt Clear
|
|
#define I2C_MICR_NACKIC 0x00000010 // Address/Data NACK Interrupt
|
|
// Clear
|
|
#define I2C_MICR_DMATXIC 0x00000008 // Transmit DMA Interrupt Clear
|
|
#define I2C_MICR_DMARXIC 0x00000004 // Receive DMA Interrupt Clear
|
|
#define I2C_MICR_CLKIC 0x00000002 // Clock Timeout Interrupt Clear
|
|
#define I2C_MICR_IC 0x00000001 // Master Interrupt Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MCR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MCR_GFE 0x00000040 // I2C Glitch Filter Enable
|
|
#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable
|
|
#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable
|
|
#define I2C_MCR_LPBK 0x00000001 // I2C Loopback
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MCLKOCNT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MCLKOCNT_CNTL_M 0x000000FF // I2C Master Count
|
|
#define I2C_MCLKOCNT_CNTL_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MBMON register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MBMON_SDA 0x00000002 // I2C SDA Status
|
|
#define I2C_MBMON_SCL 0x00000001 // I2C SCL Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MBLEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MBLEN_CNTL_M 0x000000FF // I2C Burst Length
|
|
#define I2C_MBLEN_CNTL_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MBCNT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MBCNT_CNTL_M 0x000000FF // I2C Master Burst Count
|
|
#define I2C_MBCNT_CNTL_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_MCR2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_MCR2_GFPW_M 0x00000070 // I2C Glitch Filter Pulse Width
|
|
#define I2C_MCR2_GFPW_BYPASS 0x00000000 // Bypass
|
|
#define I2C_MCR2_GFPW_1 0x00000010 // 1 clock
|
|
#define I2C_MCR2_GFPW_2 0x00000020 // 2 clocks
|
|
#define I2C_MCR2_GFPW_3 0x00000030 // 3 clocks
|
|
#define I2C_MCR2_GFPW_4 0x00000040 // 4 clocks
|
|
#define I2C_MCR2_GFPW_8 0x00000050 // 8 clocks
|
|
#define I2C_MCR2_GFPW_16 0x00000060 // 16 clocks
|
|
#define I2C_MCR2_GFPW_31 0x00000070 // 31 clocks
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SOAR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address
|
|
#define I2C_SOAR_OAR_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SCSR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SCSR_ACTDMARX 0x80000000 // DMA RX Active Status
|
|
#define I2C_SCSR_ACTDMATX 0x40000000 // DMA TX Active Status
|
|
#define I2C_SCSR_QCMDRW 0x00000020 // Quick Command Read / Write
|
|
#define I2C_SCSR_QCMDST 0x00000010 // Quick Command Status
|
|
#define I2C_SCSR_OAR2SEL 0x00000008 // OAR2 Address Matched
|
|
#define I2C_SCSR_FBR 0x00000004 // First Byte Received
|
|
#define I2C_SCSR_RXFIFO 0x00000004 // RX FIFO Enable
|
|
#define I2C_SCSR_TXFIFO 0x00000002 // TX FIFO Enable
|
|
#define I2C_SCSR_TREQ 0x00000002 // Transmit Request
|
|
#define I2C_SCSR_DA 0x00000001 // Device Active
|
|
#define I2C_SCSR_RREQ 0x00000001 // Receive Request
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SDR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer
|
|
#define I2C_SDR_DATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SIMR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SIMR_RXFFIM 0x00000100 // Receive FIFO Full Interrupt Mask
|
|
#define I2C_SIMR_TXFEIM 0x00000080 // Transmit FIFO Empty Interrupt
|
|
// Mask
|
|
#define I2C_SIMR_RXIM 0x00000040 // Receive FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_SIMR_TXIM 0x00000020 // Transmit FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_SIMR_DMATXIM 0x00000010 // Transmit DMA Interrupt Mask
|
|
#define I2C_SIMR_DMARXIM 0x00000008 // Receive DMA Interrupt Mask
|
|
#define I2C_SIMR_STOPIM 0x00000004 // Stop Condition Interrupt Mask
|
|
#define I2C_SIMR_STARTIM 0x00000002 // Start Condition Interrupt Mask
|
|
#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SRIS_RXFFRIS 0x00000100 // Receive FIFO Full Raw Interrupt
|
|
// Status
|
|
#define I2C_SRIS_TXFERIS 0x00000080 // Transmit FIFO Empty Raw
|
|
// Interrupt Status
|
|
#define I2C_SRIS_RXRIS 0x00000040 // Receive FIFO Request Raw
|
|
// Interrupt Status
|
|
#define I2C_SRIS_TXRIS 0x00000020 // Transmit Request Raw Interrupt
|
|
// Status
|
|
#define I2C_SRIS_DMATXRIS 0x00000010 // Transmit DMA Raw Interrupt
|
|
// Status
|
|
#define I2C_SRIS_DMARXRIS 0x00000008 // Receive DMA Raw Interrupt Status
|
|
#define I2C_SRIS_STOPRIS 0x00000004 // Stop Condition Raw Interrupt
|
|
// Status
|
|
#define I2C_SRIS_STARTRIS 0x00000002 // Start Condition Raw Interrupt
|
|
// Status
|
|
#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SMIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SMIS_RXFFMIS 0x00000100 // Receive FIFO Full Interrupt Mask
|
|
#define I2C_SMIS_TXFEMIS 0x00000080 // Transmit FIFO Empty Interrupt
|
|
// Mask
|
|
#define I2C_SMIS_RXMIS 0x00000040 // Receive FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_SMIS_TXMIS 0x00000020 // Transmit FIFO Request Interrupt
|
|
// Mask
|
|
#define I2C_SMIS_DMATXMIS 0x00000010 // Transmit DMA Masked Interrupt
|
|
// Status
|
|
#define I2C_SMIS_DMARXMIS 0x00000008 // Receive DMA Masked Interrupt
|
|
// Status
|
|
#define I2C_SMIS_STOPMIS 0x00000004 // Stop Condition Masked Interrupt
|
|
// Status
|
|
#define I2C_SMIS_STARTMIS 0x00000002 // Start Condition Masked Interrupt
|
|
// Status
|
|
#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SICR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SICR_RXFFIC 0x00000100 // Receive FIFO Full Interrupt Mask
|
|
#define I2C_SICR_TXFEIC 0x00000080 // Transmit FIFO Empty Interrupt
|
|
// Mask
|
|
#define I2C_SICR_RXIC 0x00000040 // Receive Request Interrupt Mask
|
|
#define I2C_SICR_TXIC 0x00000020 // Transmit Request Interrupt Mask
|
|
#define I2C_SICR_DMATXIC 0x00000010 // Transmit DMA Interrupt Clear
|
|
#define I2C_SICR_DMARXIC 0x00000008 // Receive DMA Interrupt Clear
|
|
#define I2C_SICR_STOPIC 0x00000004 // Stop Condition Interrupt Clear
|
|
#define I2C_SICR_STARTIC 0x00000002 // Start Condition Interrupt Clear
|
|
#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SOAR2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SOAR2_OAR2EN 0x00000080 // I2C Slave Own Address 2 Enable
|
|
#define I2C_SOAR2_OAR2_M 0x0000007F // I2C Slave Own Address 2
|
|
#define I2C_SOAR2_OAR2_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_SACKCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_SACKCTL_ACKOVAL 0x00000002 // I2C Slave ACK Override Value
|
|
#define I2C_SACKCTL_ACKOEN 0x00000001 // I2C Slave ACK Override Enable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_FIFODATA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_FIFODATA_DATA_M 0x000000FF // I2C TX FIFO Write Data Byte
|
|
#define I2C_FIFODATA_DATA_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_FIFOCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_FIFOCTL_RXASGNMT 0x80000000 // RX Control Assignment
|
|
#define I2C_FIFOCTL_RXFLUSH 0x40000000 // RX FIFO Flush
|
|
#define I2C_FIFOCTL_DMARXENA 0x20000000 // DMA RX Channel Enable
|
|
#define I2C_FIFOCTL_RXTRIG_M 0x00070000 // RX FIFO Trigger
|
|
#define I2C_FIFOCTL_TXASGNMT 0x00008000 // TX Control Assignment
|
|
#define I2C_FIFOCTL_TXFLUSH 0x00004000 // TX FIFO Flush
|
|
#define I2C_FIFOCTL_DMATXENA 0x00002000 // DMA TX Channel Enable
|
|
#define I2C_FIFOCTL_TXTRIG_M 0x00000007 // TX FIFO Trigger
|
|
#define I2C_FIFOCTL_RXTRIG_S 16
|
|
#define I2C_FIFOCTL_TXTRIG_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_FIFOSTATUS
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_FIFOSTATUS_RXABVTRIG \
|
|
0x00040000 // RX FIFO Above Trigger Level
|
|
#define I2C_FIFOSTATUS_RXFF 0x00020000 // RX FIFO Full
|
|
#define I2C_FIFOSTATUS_RXFE 0x00010000 // RX FIFO Empty
|
|
#define I2C_FIFOSTATUS_TXBLWTRIG \
|
|
0x00000004 // TX FIFO Below Trigger Level
|
|
#define I2C_FIFOSTATUS_TXFF 0x00000002 // TX FIFO Full
|
|
#define I2C_FIFOSTATUS_TXFE 0x00000001 // TX FIFO Empty
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_PP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_PP_HS 0x00000001 // High-Speed Capable
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the I2C_O_PC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define I2C_PC_HS 0x00000001 // High-Speed Capable
|
|
|
|
#endif // __HW_I2C_H__
|