QMK/lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt

69 lines
1.9 KiB
Plaintext
Raw Normal View History

2020-03-23 10:48:11 +01:00
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mass Storage Host Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Mass Storage Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Bulk Only</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Mass Storage Standard \n
* USB Bulk-Only Transport Standard \n
* SCSI Primary Commands Specification \n
* SCSI Block Commands Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Mass Storage host demonstration application. This gives a simple reference
* application for implementing a USB Mass Storage host, for USB storage devices
* using the standard Mass Storage USB profile.
*
* The first 512 bytes (boot sector) of an attached disk's memory will be dumped
* out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
* AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
* of the disk will be dumped to the serial port.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/