diff --git a/2017/02/solution.py b/2017/02/solution.py
index fed9022..0b9190f 100644
--- a/2017/02/solution.py
+++ b/2017/02/solution.py
@@ -31,7 +31,6 @@ sum = 0
 with open(input_f) as file:
     for line in file:
         line = list(map(int,line.rstrip('\n').split()))
-        print(line)
         for idx,i in enumerate(line):
             length=len(line)
             for j in range(0,length):
diff --git a/2017/06/solution.py b/2017/06/solution.py
index 163b01f..67d5e43 100644
--- a/2017/06/solution.py
+++ b/2017/06/solution.py
@@ -6,7 +6,7 @@ input_f = sys.argv[1]
 
 #########################################
 #                                       #
-#              Part 1                   #
+#              Part 1+2                 #
 #                                       #
 #########################################
 line = []
@@ -52,10 +52,5 @@ while stop != True: #line not in tests:
     #input()
 #print(tests)
 #print(line)
-print(steps-found_at)
 print(steps)
-#########################################
-#                                       #
-#              Part 2                   #
-#                                       #
-#########################################
+print(steps-found_at)
diff --git a/2017/07/7.md b/2017/07/7.md
new file mode 100644
index 0000000..68c5742
--- /dev/null
+++ b/2017/07/7.md
@@ -0,0 +1,72 @@
+## \-\-- Day 7: Recursive Circus \-\--
+
+Wandering further through the circuits of the computer, you come upon a
+tower of programs that have gotten
+themselves into a bit of trouble. A recursive algorithm has gotten out
+of hand, and now they\'re balanced precariously in a large tower.
+
+One program at the bottom supports the entire tower. It\'s holding a
+large disc, and on the disc are balanced several more sub-towers. At the
+bottom of these sub-towers, standing on the bottom disc, are other
+programs, each holding *their* own disc, and so on. At the very tops of
+these sub-sub-sub-\...-towers, many programs stand simply keeping the
+disc below them balanced but with no disc of their own.
+
+You offer to help, but first you need to understand the structure of
+these towers. You ask each program to yell out their *name*, their
+*weight*, and (if they\'re holding a disc) the *names of the programs
+immediately above them* balancing on that disc. You write this
+information down (your puzzle input). Unfortunately, in their panic,
+they don\'t do this in an orderly fashion; by the time you\'re done,
+you\'re not sure which program gave which information.
+
+For example, if your list is the following:
+
+    pbga (66)
+    xhth (57)
+    ebii (61)
+    havc (66)
+    ktlj (57)
+    fwft (72) -> ktlj, cntj, xhth
+    qoyq (66)
+    padx (45) -> pbga, havc, qoyq
+    tknk (41) -> ugml, padx, fwft
+    jptl (61)
+    ugml (68) -> gyxo, ebii, jptl
+    gyxo (61)
+    cntj (57)
+
+\...then you would be able to recreate the structure of the towers that
+looks like this:
+
+                    gyxo
+                  /     
+             ugml - ebii
+           /      \     
+          |         jptl
+          |        
+          |         pbga
+         /        /
+    tknk --- padx - havc
+         \        \
+          |         qoyq
+          |             
+          |         ktlj
+           \      /     
+             fwft - cntj
+                  \     
+                    xhth
+
+In this example, `tknk` is at the bottom of the tower (the *bottom
+program*), and is holding up `ugml`, `padx`, and `fwft`. Those programs
+are, in turn, holding up other programs; in this example, none of those
+programs are holding up any other programs, and are all the tops of
+their own towers. (The actual tower balancing in front of you is much
+larger.)
+
+Before you\'re ready to help them, you need to make sure your
+information is correct. *What is the name of the bottom program?*
+
+To begin, [get your puzzle input](7/input).
+
+Answer:
diff --git a/2017/07/solution.py b/2017/07/solution.py
new file mode 100644
index 0000000..e9056ce
--- /dev/null
+++ b/2017/07/solution.py
@@ -0,0 +1,24 @@
+#!/bin/python3
+import sys
+from pprint import pprint
+
+input_f = sys.argv[1]
+
+
+#########################################
+#                                       #
+#              Part 1                   #
+#                                       #
+#########################################
+
+with open(input_f) as file:
+    for line in file:
+
+
+
+
+#########################################
+#                                       #
+#              Part 2                   #
+#                                       #
+#########################################